477893
20
Zoom out
Zoom in
Previous page
1/306
Next page
– 9
Place the unit securely on a firm surface.
Insert the mains plug into a socket.
Rotate the selector switch to steam level
selection range from the OFF position.
Display - heater blinks green.
Note: If there is no or not enough water in
the steam boiler, the water pump starts and
supplies water from the reservoir into the
steam boiler. The filling process may take
several minutes.
Wait until the heater display lights up
permanently.
The steam cleaner is ready to use.
Note: The appliance briefly closes the
valve every 60 seconds. This will prevent
the valve from sticking. There will be a
slight audible click. The steam delivery is
not impaired by this.
In case of water shortage, the water short-
age display lights up red and a signal can
be heard.
Note: Every time there is not enough water
in the steam boiler, the pump automatically
supplies water from the water reservoir into
the steam boiler. If the water reservoir is
empty, the water pump is not able to fill the
steam boiler and the steam tapping is
blocked.
Fill the water reservoir up to the "MAX"
marking.
Note: The water pump tries to fill the steam
boiler in short intervals. If the filling is suc-
cessful, the steam tapping is released im-
mediately, and the red display goes out.
The emerging steam is regulated by a se-
lector switch. Depending on the type of
contamination and its severity, this selector
switch offers adjustment possiblities from
the minimum steam level (slight contamina-
tion) to the max. steam level (severe con-
tamination).
For severe contamination located in difficult
to access areas, there is the vapohydro
function.
Set selector switch to the required
steam volume.
While operating the steam switch, al-
ways direct the steam gun at a separate
piece of cloth until the steam is emitted
evenly.
Rotate the switch to the OFF position to
turn off the appliance.
Disconnect the mains plug from the
socket.
Press the cover of the appliance connector
to the bottom and disconnect the steam
plug from the appliance connector.
Empty the residual water from the water
reservoir.
Illustration -
Store the round brush in the accessory
compartment.
Insert the manual nozzle onto each ex-
tension pipe.
Put the extension pipes into the large
acessory holders.
Insert the point stream nozzle into the
accessory storage compartment.
Hook the floor nozzle into the parking
position.
Wrap the steam hose around the exten-
sion pipes and insert the steam pistol
into the floor nozzle.
Stow away the mains cable in the ac-
cessory holder for the mains cable.
Turning on the Appliance
Refilling Water
Adjusting the Steam Quantity
Adjusting the steam quantity
Turning Off the Appliance
Storing the Appliance
20 EN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher SC 5.800 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SC 5.800 C in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info