657213
12
Zoom out
Zoom in
Previous page
1/186
Next page
– 6
Illustrations on Page 2
Illustration
Insert the descaler cartridge into the opening and
push it until it is tightly fitted.
Illustration
Fill the water tank with a maximum of 1 litre of fresh
tap water.
Illustration
Plug in the mains plug.
Press the ON switch to turn on the appliance.
Illustration
Indicator lamp glows green.
The device is ready for use after approx. 30 sec-
onds.
Illustration
Set water hardness prior to first use.
ATTENTION
In order to guarantee the optimum functionality of the
descaler cartridge, the device must be set to the local
water hardness prior to the first operation.
Further information concerning the device setting can
be found in Chapter "Effect descaler cartridge and set-
ting of water hardness".
Illustration
Connect the accessories to the steam gun.
Operate steam lever.
ATTENTION
Only work with a cartridge inserted.
As soon as the device is filled with water and is tak-
en into operation, the descaling effect of the car-
tridge is activated.
Lime that is contained in the water is absorbed by
the granules in the cartridge. This prevents the cal-
cification of the device. An additional device desca-
ling is thus not required.
Note
The granules in the cartridge can change their colour af-
ter contact with water; this is related to the mineral con-
tent in the water. This discolouration is harmless and
does not have any negative effects on the device, clean-
ing work or the functionality of the cartridge.
Note
The hardness of the tap water can be inquired at your
water management office or the municipal utilities.
ATTENTION
In order to guarantee the optimum functionality of the
descaler cartridge, the device must be set to the local
water hardness prior to the first operation.
This is done via the RESET button.
Notes
The device is set to the highest water hardness lev-
el (level IV) by default.
After completion of the water hardness setting, it
remains saved until a new setting (e.g. after reloca-
tion) is necessary.
During the setting no pause of more than 15 sec-
onds may take place. Otherwise the device is auto-
matically set to the water hardness selected last or
the highest water hardness with initial start-up.
Please observe the following procedure:
Connect the mains cable to the power supply sys-
tem.
The device must be switched off prior to the setting.
Push the RESET button and hold it down during the
start-up of the device.
After 2 seconds the indicator light is blinking and
signals the current setting of the water hardness via
the number of impulses.
By repeatedly pressing the RESET button, the set-
ting of the water hardness level changes.
As long as the RESET button is pressed, the flash-
ing impulse for the relevant water hardness level is
not shown.
As soon as the button is released, the flashing im-
pulse appears for the output of the selected water
hardness.
If the water hardness is set to the desired level,
hold down the RESET button for 3 seconds so that
the setting is saved.
The saving process is displayed by the lighting up
of the indicator light for the water hardness.
ATTENTION
If the device is used in another area with a different wa-
ter hardness (e.g. after relocation), the water hardness
must be reset.
E1 Extension tubes (two tubes)
E2 Unlocking button
F1 Floor nozzle
F2 Retaining clip
F3 Terry floor cloth
F4 Microfibre floor cloth
Quick Reference
Effect descaler and adjustment of water
hardness
Effect descaler cartridge
Water hardness levels and flashing impulses
Degree of hard-
ness
° dH mmol/l Number
of flashing
impulses
Interval of
flashing
impulses
I soft 0- 7 0-1,3 1x
4 seconds
II medium 7-14 1,3-2,5 2x
III hard 14-21 2,5-3,8 3x
IV very hard >21 >3,8 4x
Setting of the water hardness
12 EN
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher SC 3 Premium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SC 3 Premium in the language / languages: All languages as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info