382317
24
Zoom out
Zoom in
Previous page
1/294
Next page
24 English
The power nozzle is attached directly or
using the extension piece (D2) on the detail
nozzle. The power nozzle increases the
emission speed of the steam.
Application:
removal of especially stubborn dirt
cleaning out corners, joints, etc.
Pull the terry cloth cover (E2) over the ma-
nual nozzle.
Application:
small, washable surfaces, such as kit-
chen surfaces made of plastic, tiled
walls
windows, mirrors
furniture fabrics
vehicle interior, windscreens
bath-tubs
Application:
windows
–mirrors
glass surfaces on shower cubicles
other glass surfaces
Î Apply steam to the glass surface from a
distance of approximately 20 cm until
the surface is moistened evenly. Then
push the lock (C3) to the rear to prevent
an undesired actuation of the steam
switch (C4). Wipe the glass surface in
straight lines from the top to the bottom
using the rubber lip of the window
nozzle. Wipe the rubber lip and the bot-
tom edge of the window dry after each
strip.
Î Before cleaning with the window
nozzle, disolve fat residue using the
manual nozzle (E1) and a terry cloth co-
ver (E2) .
Application:
all washable wall and floor coverings,
e.g.: stone floors, tiles, and PVC floors.
Î Attach the floor cloth to the floor nozzle.
1 Fold the floor cloth the long way and
place the floor nozzle on top of it.
2 Open holding clamps.
3 Place the cloth ends into the openings.
4 Close the holding clamps.
Caution
Do not insert fingers between the clamps.
Figure 10
Î To remove the cloth, press the retaining
clips (H2), and pull out the cloth.
Î Turn and exchange the floorcloth in re-
gular intervals. Thus, you improve the
ability to pick up dirt.
Î Work slowly on very dirty surfaces to al-
low the steam to act on the dirt for a lon-
ger period of time.
Î If there are residues of detergents or
floor cleaning products (e.g. wax, liquid
polish) on the surface to be cleaned, st-
reaks may form during the cleaning.
These streaks normally disappear after
a repeated use of the steam cleaner.
Special accessory, see page 26 for the or-
der number.
Î Firmly insert the steam plug (K5) into
the appliance connector (A1). The locks
of the steam plug must lock into the co-
ver of the appliance connector.
We recommend the use of the Kärcher
ironing table with active steam extraction.
This ironing table has been especially desi-
Power nozzle (D4)
Manual nozzle (E1)
Window nozzle (F1)
Floor nozzle (H1)
Steam iron (K1) (optional)
Steam ironing
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher sc 1402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher sc 1402 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info