803421
17
Zoom out
Zoom in
Previous page
1/284
Next page
English 17
used for autonomous, continuous maintenance
cleaning on all common floor coverings.
This device has been developed for use in private
households and is not intended for the load imposed
by commercial use.
Environmental protection
The packing materials can be recycled. Do not
dispose of packaging as household rubbish but
place it in recycling.
Old devices contain valuable, recyclable materials that
should be recycled. Batteries and battery packs contain
substances which should not be released into the envi-
ronment. Therefore, please dispose of old devices, bat-
teries and battery packs using suitable collection
systems.
Adhere to the recommendations of the legislature re-
garding the handling of lithium ion batteries. Dispose of
used and defective battery packs in accordance with the
applicable regulations.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.de/REACH
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Device description
Illustration A
1Reset switch
2Top cover
3Laser sensor (LiDAR)
4On/Off button
5"Return to charging station" button
6Wiper cloth
7Brush
8Battery compartment
9Wheel
10 Fall sensor
11 Collision sensor
12 Side brush
13 Ultrasound sensor
14 3D sensor with camera
15 Battery terminals
16 Wiper cloth holder
17 Brush cover
18 Dust container
19 water reservoir
20 Cleaning tool
21 Charging station
22 Mains plug
Functional description
The device consists of a charging station and a battery-
powered cleaning robot.
The mobile cleaning robot obtains its energy from a
built-in rechargeable battery. The cleaning robot can
clean for up to 120 minutes with a single battery charge.
It automatically returns to the charging station to re-
charge when the battery charge decreases.
The cleaning robot moves systematically. It scans the
room with a 3-D laser sensor with camera (LiDAR) and
then cleans the room step-by-step. It avoids obstacles
that are at least as high as the LiDAR tower.
Artificial intelligence helps the cleaning robot to avoid
complex obstacles such as cables or shoes without in-
terference.
Due to the calculation of the intelligent driving strategy
by the artificial intelligence and the subsequent obstacle
avoidance, it can take a few seconds, depending on the
obstacle situation, until the robot resumes its regular
travel path to clean the free area in straight paths.
The flat design of the cleaning robot allows it to clean
under furniture such as beds, sofas and cupboards.
The ultrasound sensor detects carpets and avoids them
during wet cleaning or combination cleaning. For dry
cleaning only, the unit increases its suction performance
on carpets (auto-boost).
Fall sensors that detect stairs and landings prevent falls.
Collision sensors detect obstacles and avoid them.
The battery for the cleaning robot is charged in the
charging station.
If the cleaning robot starts the cleaning work from the
charging station, it returns to the charging station when
the battery charge is insufficient.
As soon as the charging process is finished, the clean-
ing robot automatically leaves the charging station and
continues the cleaning work. The cleaning robot also re-
turns to the charging station when it has finished clean-
ing.
Status displays
Functions
Sleep mode
The cleaning robot automatically switches to sleep
mode after 5 minutes of inactivity. Press any button to
wake it up.
LED display Status
Lights up blue Driving autonomously
Flashes blue slowly Autonomous driving paused
Flashes blue fast WLAN connection mode
Flashes green slowly Cleaning robot charging
Lights up green Cleaning robot fully charged or
successfully connected
Flashes red slowly Battery too empty to start
Flashes red fast Error situation
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher RCV 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher RCV 5 in the language / languages: All languages as an attachment in your email.

The manual is 6.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info