803422
23
Zoom out
Zoom in
Previous page
1/296
Next page
English 23
Replacing the side brush
We recommend replacing the side brush after 3 to
6 months.
Note
To avoid damage, do not place the robot on the laser
sensor (LiDAR).
1. Turn the cleaning robot upside down.
2. Remove the side brush.
Illustration V
3. Install the new side brush.
Illustration B
Replacing the rechargeable battery
The rechargeable battery has reached the end of its life
if the cleaning robot constantly drives to the station for
charging after a short cleaning operation.
1. Switch off the cleaning robot, see chapter Switching
off the cleaning robot.
2. Send the cleaning robot to the Customer Service.
Observe the regulations for shipping lithium-ion bat-
teries, see Chapter transport.
Troubleshooting guide
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Fault Cause Rectification
Battery does not charge Charging contacts dirty. 1. Wipe the charging contacts on both the
charging station and the cleaning robot
with a dry cloth.
Ambient temperature below 0 °C or
above 35 °C.
1. Use the cleaning robot at temperatures
above 0 °C and below 35 °C.
The cleaning robot is not
returning to the charging
station
Battery is discharged. 1. Manually place the cleaning robot on the
charging station and let it charge complete-
ly.
The cleaning robot is too far away from
the charging station.
1. Move the cleaning robot closer to the
charging station.
2. Manually place the cleaning robot on the
charging station.
Not enough space around the charging
station.
1. Ensure that there is sufficient space
around the charging station, see chapter
Setting up the charging station.
There are too many obstacles around the
charging station.
1. Place the charging station in a more open
area, see chapter Setting up the charging
station.
The cleaning robot remaps its environ-
ment when it has been moved over a
longer distance.
1. Manually place the cleaning robot on the
charging station.
The cleaning robot was not started from
the charging station. In this case, it only
returns to the place from which it was
started.
1. Manually place the cleaning robot on the
charging station.
The cleaning robot pro-
duces unusual noises
A foreign object could be caught in the
brush, the side brush or in a wheel.
1. Switch off the cleaning robot.
2. Remove any foreign objects.
The cleaning robot does
not continue cleaning
The cleaning robot is in "Do not disturb"
mode.
1. Ensure that the cleaning robot is not in "Do
not disturb" mode.
The cleaning robot is being charged
manually or has been placed in the
charging station.
1. Wait until the cleaning robot is fully
charged.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher RCV 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher RCV 3 in the language / languages: All languages as an attachment in your email.

The manual is 6.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info