Manual Karcher RCV 3 (page 19 of 296) (All languages)

803422

Zoom out

Zoom in

1/296

English 19

●Activation/deactivation of the "Do not disturb" mode

●FAQ with detailed troubleshooting

●Contact details for the KÄRCHER Service Centres

Connecting the cleaning robot with the Kärcher

Home Robots App and WLAN:

1. Download the KÄRCHER Home&Garden App from

the Apple App Store or from the Google Play Store.

2. Open the Kärcher Home Robots App.

3. Create an account (if you are not already regis-

tered).

4. Add the desired cleaning robot.

5. Follow the step-by-step instructions in the App.

Initial startup

Installing 2-in-1 dust container with water

reservoir

The 2-in-1 dust container with water reservoir may con-

tain a small amount of residual water due to quality con-

trol. This is normal.

Use the 2-in-1 dust container with water reservoir when

you want to clean both dry and wet.

For dry cleaning, remove the wiper cloth and the wiper

cloth holder, see chapter Removing the wiper cloth

holder with wiper cloth.

Illustration F

1. Open the cover at the top.

2. Press the 2-in-1 dust container with water reservoir

into position until it audibly latches into place.

3. Close the cover at the top.

Removing the 2-in-1 dust container with

water reservoir

Illustration G

1. Open the cover at the top.

2. Press the clamp.

3. Remove the 2-in-1 dust container with water reser-

voir.

Installing the wiper cloth holder with wiper

cloth

1. Attach the wiper cloth to the wiper cloth holder.

Illustration H

a Press the wiper cloth onto the wiper cloth holder.

b Press on the hook and loop strip.

2. Install the wiper cloth holder.

Illustration I

a Press the clamps together.

b Push the wiper cloth holder horizontally into the

cleaning robot until it audibly latches into place.

Removing the wiper cloth holder with wiper

cloth

1. Press any button.

The cleaning robot stops.

2. Remove the wiper cloth holder.

Illustration J

a Press the clamps together.

b Remove the wiper cloth holder.

c Pull the wiper cloth off the wiper cloth holder.

Installing the dust container

Install the dust container if you only want to dry clean.

For dry cleaning, remove the wiper cloth and the wiper

cloth holder, see chapter Removing the wiper cloth

holder with wiper cloth.

Illustration K

1. Open the cover at the top.

2. Press the dust container into position until it audibly

latches into place.

3. Close the cover at the top.

Removing the dust container

Illustration L

1. Open the cover at the top.

2. Press the clamp.

3. Remove the dust container.

Reset WLAN connection

If you switch to a new router or change your WLAN

password, you must reset the cleaning robot's WLAN

connection.

Note

Only 2.4 GHz WLAN networks are supported.

1. Switch on the cleaning robot, see chapter Switching

on the cleaning robot.

2. Press the On/Off button and the "Return to charging

station" button simultaneously for 7 seconds until a

voice says: "Resetting the WLAN connection and

entering network configuration mode".

3. Connect the cleaning robot to the charging station,

see chapter Connecting the cleaning robot with the

charging station.

Restoring the factory settings

1. Press and hold the "Return to charging station" but-

ton for 5 seconds until a signal sounds.

2. Again, press and hold the "Return to charging sta-

tion" button for 5 seconds until a signal sounds.

Factory settings are restored.

Setting up cleaning zones

The cleaning robot only cleans within the selected area.

Cleaning zones can only be set up with the App. Down-

loading the App is described in the chapter Connecting

cleaning robots with WLAN and App.

Follow the step-by-step instructions in the App.

Setting up virtual walls

Virtual walls and restricted areas prevent the cleaning

robot from entering areas that should not be cleaned.

Virtual walls can only be set up with the App. Download-

ing the App is described in the chapter Connecting

cleaning robots with WLAN and App.

Follow the step-by-step instructions in the App.

Activating mapping

The cleaning robot starts from the charging station and

automatically updates its map after completing a clean-

ing task and after charging.

Mapping can only be set up with the App. Downloading

the App is described in the chapter Connecting clean-

ing robots with WLAN and App.

Note

To avoid losing the map, wait a few seconds after the

first mapping until the map is saved.

Follow the step-by-step instructions in the App.

Operation

ATTENTION

Damage due to moisture

Remove the wiper cloth with wiper cloth holder before

charging and when not in use, see chapter Removing

the wiper cloth holder with wiper cloth.

Remove the 2-in-1 dust container with water reservoir

before charging and when not in use, see chapter Re-

moving the 2-in-1 dust container with water reservoir.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher RCV 3 in the language / languages: All languages as an attachment in your email.

The manual is 6.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher RCV 3 Manual

Product: