477969
26
Zoom out
Zoom in
Previous page
1/392
Next page
– 8
Illustration
Push the new filter bag all the way into
the holder.
Caution: Never operate the appliance
without a filter bag!
Close the filter cover.
Illustration
If you have replaced the filter bag 5
times, also exchange the motor protec-
tion filter (included in the spare filter bag
kit).
Clean the running surfaces of the
wheels when these become dirty.
Dirt particles (such as sand, etc.) can
collect on the running surface and dam-
age sensitive, smooth floor surfaces.
Clean the flat filter in the cleaning robot
every time you exchange the filter bag in
the station.
Empty the dirt receptacle and open it
(refer to the description above).
Illustration
Remove the flat filter from the dirt re-
ceptacle.
Shake out the flat filter, or clean it using
a small soft brush.
Illustration
Reinsert the flat filter, the flaps should
point toward the locking lever.
Empty the dirt receptacle and open it
(refer to the description above).
Remove the brush roller
Illustration
Pull the brush roller out of the right
guide.
Afterwards, pull the brush roller out of
the lateral holder.
Cleaning the brush roller
The dirty brush roller is automatically
cleaned during each cleaning operation in
the station. You can manually remove re-
maining hairs and wrapped up threads.
Illustration
Use a pair of scissors to cut along the
cutting edge of the brush roller.
Remove the wrapped up threads and
hairs.
Replacing the brush roller
Replace the brush roller when its bris-
tles are worn out.
Spare brush roller:
Order number: 4.250-075.0
Illustration
Install the brush roller
Insert the brush roller first into the left
holder.
Then press the brush roller into the right
hand side holder with the hook facing
down; ensure that it locks into place.
Empty the dirt receptacle and open it
(refer to the description above).
Illustration
Clean the dust sensors using a soft
cloth or a soft paintbrush.
Exchange the motor protection filter
Cleaning robot
Cleaning the wheels
Begin all maintenance work on the
cleaning robot with the following steps:
Empty the dirt receptacle; see Chapter
"Start-up“.
Opening the dirt receptacle:
Rotate the cleaning robot and place it
on a soft surface.
Illustration
Open both locking levers of the dirt re-
ceptacle.
Illustration
Remove the cover of the dirt recepta-
cle.
Cleaning the flat filter
Remove, clean, replace and install the
brush roller
Clean dust sensors
26 EN
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher RC 4.000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher RC 4.000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info