Manual Karcher Puzzi 30-4 E (page 17 of 244) (All languages)

804556

Zoom out

Zoom in

1/244

– 4

Illustration

Unlock bonnet, in order to do so, fold up

the carrying handle of the wastewater

container by 90° Bonnet can be

opened.

Unlock the bonnet.

Illustration

Swivel the bonnet backwards by 180°

and pull it out.

Note: Be careful when inserting the

bonnet, so that the guide pins do not get

damaged.

If the wastewater container is full,

switch off the appliance. In order to do

so, set the rotary switch to 0/OFF.

Unlock the bonnet, swivel it upwards

and snap it in place at the locking devic-

es.

Remove the wastewater container from

the appliance and drain it.

Switch off the appliance, in order to do

so, set the rotary switch to 0/OFF.

Shortly activate the lever on bender to

decrease the pressure.

Separate bender from the spray/suction

hose.

Remove the lid of the fresh water tank.

Insert the suction hose into the fresh

water reservoir.

Set rotary switch to vacuuming. Suction

turbine is switched on.

Empty the fresh water reservoir and

switch the appliance off.

Empty the wastewater reservoir.

Connect the manifold (with suction pipe

and nozzle) to the suction hose.

Connect the coupling of the spray hose

with the manifold and snap in place.

Fill approx. 2 litres of fresh water into

the fresh water reservoir.

Do not add any detergents.

Set rotary switch to spraying. Spray

pump is switched on.

Hold floor nozzle over a drain.

Activate lever on bender and flush the

appliance for appr. 1 to 2 minutes.

Switch off the appliance, in order to do

so, set the rotary switch to 0/OFF.

Flush appliance.

Dismantle the bonnet, unlock and re-

move the filter casing. Clean the bonnet

under running water.

Empty the wastewater container and

clean it under running water.

Empty the fresh water reservoir.

Clean the outside of the appliance with

a damp cloth.

Remove all water from the appliance

prior to longer periods of non-use to

avoid offensive odours.

Allow appliance to dry thoroughly: Un-

lock the bonnet, swivel it upwards and

snap it in place at the locking devices.

Remove the lid of the fresh water tank.

Illustration

Place the floor nozzle in the tray and

snap the suction pipe into the holder.

Store the suction hose and the mains

cable as shown in the illustration.

Place the appliance in a dry room and

secure it from unauthorized use.

Spray and suction off detergent solution

in one work cycle.

Note: Repeated suctioning without spray-

ing will shorten the drying time.

Unlocking the bonnet

Dismantling the bonnet

Empty wastewater container

Empty the fresh water reservoir

Flush appliance

After each operation

Storing the Appliance

Cleaning methods

Normal soiling

17EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Puzzi 30-4 E in the language / languages: All languages as an attachment in your email.

The manual is 4.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher Puzzi 30-4 E Manual

Product: