803782
12
Zoom out
Zoom in
Previous page
1/140
Next page
12 English
Venting the pump
1. Unscrew the spray lance from the gun.
2. Actuate the power switch.
3. Press the spray trigger for at least 10 seconds until
the system is vented.
4. Switch off the device.
5. Refitting the spray lance
Operation
Operation
1. Remove the spray lance.
2. Press the power switch.
Illustration D
The device starts up.
3. Press the spray trigger to spray or push it forwards
for continuous operation.
Illustration E
Note
The spray actuation button is now locked.
Note
Make sure that the spray actuation button is not locked
before mounting the battery pack.
4. To stop the spraying process, release the spray ac-
tuation button or, in continuous operation, push it
back to stop it.
Setting the spray jet
1. Turn the nozzle to adjust the spot or spray jet
Illustration F
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
ATTENTION
Uncontrolled startup
Risk of injury and damage
Remove the battery pack from the device before trans-
port.
Empty the device completely prior to transport.
Secure the device against slipping and tipping over
when transporting in vehicles.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
CAUTION
Uncontrolled startup
Risk of injury and damage
Remove the battery pack from the device before stor-
age.
ATTENTION
Store the device in a dry, well ventilated location out of
the reach of children. Keep the device away from corro-
sive substances such as garden chemicals.
1. Clean the device.
2. For space-saving storage, unscrew the spray lance
and press it into the lance clip on the battery slot.
Illustration H
3. Press the lance handle into the device handle.
Care and maintenance
CAUTION
Uncontrolled startup
Risk of injury and damage
Remove the battery from the device before any work.
ATTENTION
Do not use solvents to clean the plastic parts, as they
corrode the materials used on the device. Remove dirt
such as dust, oil and lubricants with a clean cloth.
Cleaning the tank
1. Remove the battery pack.
2. Open the lock latches and remove the tank.
Illustration I
3. Drain the tank content.
4. Clean the outside of the tank with a clean, dry cloth.
5. Fill the tank one third with clean water
6. Connect the tank to the motor casing.
7. Reinsert the battery.
8. Spray the tank content until it is completely empty.
9. Repeat this procedure several times.
Emptying the tank
1. Remove the battery pack.
2. Open the lock latches and remove the tank.
Illustration I
3. Drain the tank content
Clean the nozzle
1. Remove the battery pack.
2. Unscrew the nozzle from the spray lance.
3. Push a thin wire through the slotted holes to remove
residues.
Illustration K
4. Rinse the nozzle with clean water.
5. Dry the nozzle with a clean, dry cloth and refit the
nozzle.
Troubleshooting guide
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Device does not spray
Nozzle is clogged
1. Clean the nozzle
Hose is clogged
1. Clean hose
Tank is empty
1. Fill tank
Air in the system
1. Vent pump (see chapter "Venting the device")
Motor not running
Battery is empty
1. Battery charging
Battery missing or battery not inserted correctly
1. Insert the battery correctly
Battery is too cold or too hot
1. Store the battery indoors or let it cool down
Device switches itself off
Circuit breaker has switched off
1. Wait until the circuit breaker switches the device
back on again
Battery cannot be charged
Battery contacts are soiled
1. Clean battery contacts
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher PSU 4-18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher PSU 4-18 in the language / languages: All languages as an attachment in your email.

The manual is 6.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info