– 2
1 Hose coupling
2 Stopper / retract
3 Hose
4 Stopper
5 Metal bow
6 Handle
7 Wall mount
8 Fastening material
9 Tap connection with reduction fitting
10 Padlock (not included in the delivery)
11 Accessory compartment
12 Connection hose
13 Carrying handle
14 Spray nozzle
Illustration
Mark the bores to mount the wall mount
and place dowels into the drilled bores.
Fasten the wall mount using the includ-
ed washers and screws.
Illustration
Place the hose box flush with the metal
bow and hook it in. Make sure that all 4
screw heads protrude from the hook
holes.
Slide the metal bow downwards verti-
cally all the way.
Illustration
Attach the accessories holder to the
bottom side of the metal bow.
Illustration
To change the swivel range, pull the left
or the right stop toward the outside and
swivel the hose box into the desired po-
sition.
(The swivel range of the hose box can
be swivelled in 30°-steps.)
Let the stop lock in in the desired posi-
tion.
Illustration
Loosen both screws on the stopper.
Slide the stopper to the desired position
and screw it in.
Illustration
The product can be protected against
theft. Use the padlock for this.
Note
Make sure the hose has free return play. It
should not be too dirty when it is coiled to
ensure the proper function of the automatic
retraction/recoiling.
Connect the connecting hose to the wa-
ter tap.
Open tap.
Pull the hose out to the desired length.
The stop function of the hose box can
be activated in < 50 cm-steps and can
be noticed by a clicking sound.
Attach the Kärcher garden accessories
to the hose coupling.
Trigger the automatic recoiling function
by briefly pulling on the hose.
The garden hose is coiled up evenly.
Turn off tap.
Operation
Product description
Preparing the Appliance
Operation
Unroll the hose
Coil the hose
Finish operation
