Manual Karcher NT 75-1 (page 20 of 292) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

478623

Zoom out

Zoom in

1/292

– 3

The appliance allows 2 operating modes:

1 Industry vacuum cleaner mode (socket

not used)

2 Dedusting mode (socket used)

 Connect the suction hose and insert in-

sert the suction nozzle or connect to the

dust-generating device depending on

the operating mode.

ṇ Warning

Do not vacuum without the filter elements;

otherwise, the suction motor can get dam-

aged and this can be hazardous to health

on account of increased release of fine dust

particles.

The horn blows when the air speed falls be-

low 20 m/s.

Note: The horn reacts to negative pres-

sure.

 Set the rotary switch to the correct suc-

tion hose cross-section.

Static charge is deflected by providing

earthing to the connection nozzles. This

prevents the formation of sparks and cur-

rent shocks due to attachments (option)

with electrical conductivity.

– The appliance is equipped with a paper

filter bag fitted with locking lid.

Order No. Safety filter sack: 6.904-

420.0 (5 pieces)

Note:You can use this appliance to take up

all types of dust up to dust class H. It is stat-

utorily necessary to use a dust collection

bag (see Filter systems for order number).

Note: The appliance is suited as industrial

vacuum cleaner and as dedusting device

for the mobile operation to take up dry, non-

combustible dusts with MAK values.

– Unused flat-fold filters may only be

stored and transported in the packaging

(carton).

Illustration

– The lamella of the flat-fold filter should

not be touched during installation.

ṇ Warning

The flat-fold filter and the safety filter sack

must never be removed during the dust ex-

traction process.

 Release and remove the suction head.

Illustration

 Insert the safety filter sack.

Illustration

 Place the safety filter bag over the con-

tainer and insert the interior paper filter

bag into the container in an L-shaped

fashion.

 Insert and lock the suction head.

ƽ Danger

No dusts hazardous to health should be

sucked in during wet vacuuming.

Illustration

 Remove the brush strips.

 Install the rubber lips.

Note: The structured side of the rubber lips

must point outwards.

Illustration

 Properly insert the connection socket in

the suction connection.

 Push in the connection socket until it

locks into place.

 Turn the suction connection with the

connection socket to the right to close it

tightly.

Note: The accurate fit is ensured by means

of a "bayonet connection".

 Release and remove the suction head.

Illustration

 Pull over the safety filter sack.

Illustration

 Pull out the safety sheet.

 Close the safety filter sack using the

self-adhesive flap.

Start up

Horn

Anti-static system

Dry vacuum cleaning

Installing the safety filter sack

Wet vacuum cleaning

Inserting the rubber lips

Close the suction connection

Removing the safety filter sack

20 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher NT 75-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher NT 75-1 Manual

Product: