Manual Karcher NT 75-1 Tact Me Te H (page 15 of 168) (All languages)

804520

Zoom out

Zoom in

1/168

English 15

Closing the suction connection

1. Fit a plug exactly into the suction connection.

Illustration G

2. Push the plugs in until they engage.

3. Close the suction connection tightly with the plug by

turning it clockwise.

Note

The bayonet connection ensures a precise fit.

Removing the safety filter bag

●The safety filter bag must always be removed when

vacuuming wet substances.

1. Unlock and remove the suction head.

2. Fold up the safety filter bag.

Illustration H

3. Take off the protective film and close the ventilation

holes with a self-adhesive tab.

Illustration I

4. Pull the safety filter bag out towards the back.

5. Seal the suction connection opening of the safety fil-

ter bag tightly with a sealing cap.

Illustration J

6. Close the safety filter bag tightly with the attached

cable tie.

Illustration K

7. Remove the safety filter bag.

8. Clean the container inside with a moist cloth.

9. Dispose of used safety filter bag in dust-tight bag in

accordance with statutory regulations.

10. Fit and lock the suction head.

General

●We recommend switching off the "Automatic filter

dedusting" function when vacuuming wet dirt with

the crevice nozzle or the upholstery nozzle (option-

al), or when sucking mainly water out of a container.

●The device switches off automatically when the

maximum fluid level is reached.

●When vacuuming non-conductive liquids (e.g. drill

emulsion, oils and grease) the device does not au-

tomatically switch off when the container is full. The

filling level must be continuously monitored and the

container emptied on a timely basis.

●On completion of wet vacuum cleaning: Clean the

flat fold filter using the dedusting function. Clean the

electrodes with a brush. Clean the container with a

moist cloth and dry it off.

Clip connection

The suction hose is equipped with a clip system. All ac-

cessory parts with a nominal width of 35 mm can be

connected.

Illustration L

Operation

Turn switch

Switching on the device

1. Connect the mains plug.

2. Switch on the device at the turn switch.

Adjusting the suction power

1. Adjust the suction power (min-max) via the rotary

control.

Working with power tools

DANGER

Danger of electric shock

Risk of injury and damage.

The socket is only intended for direct connection of pow-

er tools to the vacuum cleaner. Any other use of the

socket is prohibited.

1. Plug the mains plug of the power tool into the power

socket on the vacuum cleaner.

2. Switch on the device at the turn switch. Control lamp

lights up, vacuum cleaner is in standby mode.

Note

The vacuum cleaner is automatically switched on and

off with the power tool.

Note

The vacuum cleaner has a startup delay of up to 0.5

seconds and an after-running time of up to 15 seconds.

Note

See the Technical data for the permissible power rating

of the power tool.

3. Adapt the tool adapter to the connection of the pow-

er tool.

Illustration M

4. Remove the angle piece from the suction hose.

Illustration N

5. Install the tool adapter on the suction hose.

6. Connect the tool adapter to the power tool.

Illustration O

7. Set the minimum volume flow on the turn switch for

suction hose cross section. The scale shows the

suction hose suction hose cross section.

Note

The different suction hose cross sections are necessary

in order to adapt to the different connection cross sec-

tions of the processing machines.

Note

For operation as a dust removal device for mobile oper-

ation (processing machine plugged into the vacuum

cleaner) the integrated monitoring system must be ad-

justed to suit the connected processing machine (dust

generator). This means that the user must be warned

when the flow rate drops below the minimum value 20

m/s needed for correct vacuuming.

Note

Information on the minimum flow rate depending on the

vacuum can be found on the type plate.

Automatic filter dedusting

The device is equipped with a special filter dedusting

function, which is particularly effective against fine dust.

The flat fold filter is automatically cleaned every 15 sec-

onds by a blast of air (pulsing noise).

Switching off the device

1. Switch off the device at the turn switch.

2. Pull out the mains plug.

Device ON

Automatic filter dedusting: OFF

Device OFF

Device ON

Automatic filter dedusting: ON

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher NT 75-1 Tact Me Te H in the language / languages: All languages as an attachment in your email.

The manual is 7.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher NT 75-1 Tact Me Te H Manual

Product: