804521
16
Zoom out
Zoom in
Previous page
1/204
Next page
16 English
26 Hose cross section turn switch
27 Hose cross-section scale
28 Turn switch with suction output regulation
29 Socket
30 Floor nozzle holder
31 Drain hose (NT 50/1 only)
32 Suction pipe holder
33 Cable hook (NT 50/1 only)
34 Lock latch of the filter cover
35 Angle piece
36 Mains cable
37 Angle piece holder (NT 30/1, NT 40/1 only)
38 Filter frame
39 Flat fold filter (PTFE H)
40 Filter dedusting
41 Type plate
Symbols on the device
Asbestos marking
Safety devices
Monitoring of the flat fold filter
The device automatically switches off when operated
without a flat fold filter.
Preparation
1. Unpack the device and install the accessories.
Illustration B
Initial startup
The device has 2 operating modes:
1 Industrial vacuum cleaner operation (power socket
not used)
2 Dust removal operation (power socket used)
WARNING
Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Do not vacuum without correctly installed filter ele-
ments, otherwise a danger to health from increased fine
dust emission is present.
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the flat fold filter when vacuuming.
1. Connect the suction hose and attach a suction noz-
zle or connect to the dust generating device, de-
pending on the operating mode.
Horn
Intermittent tone
The horn sounds (intermittent tone) when the air speed
drops below 20 m/s.
Note
The horn reacts to a vacuum.
1. Set the turn switch to the correct hose cross-section.
Continuous tone
The horn sounds (continuous tone) when the cooling air
filter is clogged.
1. Allow the device to cool down. Clean/replace the
cooling air filter.
Anti-static system
Static charges are discharged through the earthed con-
nection nozzles. This prevents sparking and electric
shocks with electrically conducting accessories (includ-
ed in the scope of delivery).
Dry vacuuming
NT 30/1: The unit is equipped with a safety filter bag
with sealing cap, order number 2.889-183.0 (5 piec-
es).
NT 40/1, NT 50/1: The unit is equipped with a safety
filter bag with sealing cap, order number 2.889-
184.0 (5 pieces).
The device is equipped with a dust bag with cable
ties, order no. 2.889-231.0 (10 pieces).
Note
All types of dust up to dust class H can be vacuumed
with this device. The use of a dust collection bag (for or-
der no. see filter systems) is required by law.
Note
The device is suitable for industrial extraction and a dust
removal device for mobile operation for vacuuming dry,
non-inflammable dusts with workplace limit values
(AGW).
Unused flat fold filters may only be stored and trans-
ported in their packaging (cardboard box).
WARNING
Danger from dust that is harmful to your health
Respiratory sicknesses through inhalation of dust.
Do not vacuum without a correctly installed safety filter
bag/dust bag, otherwise a danger to health from in-
creased fine dust emission is present.
Installing the safety filter bag
1. Unlock and remove the suction head.
2. Pull the safety filter bag over the container.
Illustration C
3. Attach the safety filter bag.
Illustration D
4. Fit and lock the suction head.
CAUTION CONTAINS ASBESTOS.
Health risk posed by inhalation of fine as-
bestos dust. Observe safety regulations.
If necessary, remove the sticker in the relevant national
language from the enclosed sheet of stickers and stick
it onto the device over the German text.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher NT 30-1 Tact Te H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher NT 30-1 Tact Te H in the language / languages: All languages as an attachment in your email.

The manual is 12.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info