Manual Karcher MT CS 250-36 (page 13 of 196) (All languages)

804769

Zoom out

Zoom in

1/196

English 13

shaft connection of the rod and the cutting tool are se-

curely fastened.

ATTENTION ● Only store the device indoors.

Safe transport and storage

몇WARNING ● Switch the device off, allow it to

cool down and remove the battery pack before storage

or transportation. ● Cover the cutting tool with the bar

scrabbard before storing or transporting the device.

몇CAUTION ● Risk of injury and damage to the

device. Secure the device against movement or falling

down during transport.

ATTENTION ● Remove all foreign bodies from the

device before storage or transportation. ● Store the de-

vice in a dry, well ventilated location out of the reach of

children. Keep the device away from corrosive sub-

stances such as garden chemicals. ● Do not store the

device outdoors. ● Make sure the chain is lightly oiled

when storing the device for more than one month. The

manufacturer recommends using a spray for rust pro-

tection and oiling. Ask your Customer Service depart-

ment to recommend a suitable spray.

Safe servicing and care

Note ● Service and maintenance work may only be

performed by suitably qualified and specially trained

personnel. We recommend sending the product to an

authorised service centre for repair. ● You may only

perform the adjustments and repairs described in these

operating instructions. Contact your authorised Cus-

tomer Service department for other repairs.

몇WARNING ● Risk of injury. The saw chain is

extremely sharp. Wear suitable protective gloves when

performing chain maintenance and when cleaning, se-

curing or removing the bar scrabbard. ● Follow the in-

structions for chain tensioning, chain tension

adjustment and chain lubrication. ● Severe injuries due

to kickback if a damaged chain is not replaced or re-

paired. ● Turn off the motor and remove the battery

pack before cleaning or servicing the device. ● Ensure

that the device is in a safe condition by regularly check-

ing that all bolts, nuts and screws are screwed tight.

● Risk of injury due to long, uninterrupted use of the de-

vice. Take regular breaks while working with the device.

몇CAUTION ● Only use accessories and spare

parts and attachments that are approved by the manu-

facturer. Only original spare parts, original accessories

and original attachments ensure fault-free and safe op-

eration of the device.

ATTENTION ● Clean the product with a soft, dry

cloth each time after use.

Residual risks

몇WARNING

● Certain residual risks remain present, even when the

device is operated in the prescribed manner. The fol-

lowing dangers can be present when using the de-

vice:

●Vibration can cause injuries. Use the correct tools

for the job, use the handles provided and restrict the

working time and hazard exposure time.

●Noise can cause hearing injuries. Wear hearing pro-

tection and limit the duration of exposure.

●Incision injuries on contact with exposed saw teeth

of the saw chain.

●Incision injuries due to unforeseen, abrupt move-

ments or kickback of the guide rail.

●Incision injuries / risk of injection by parts flying away

from the saw chain.

●Injuries caused by hurled objects (wood shavings,

splinters).

●Injuries due to falling objects. Always wear a suita-

ble protective helmet when working overhead.

●Inhalation of dust and particles.

●Skin contact with the lubricant / oil.

Risk reduction

몇CAUTION

● Using the device for longer periods can cause poor

circulation in the hands due to vibrations. A general

period of use cannot be set, because this depends on

several influencing factors:

●Personal tendency to suffer from poor circulation

(frequently cold fingers, tingling sensation in the fin-

gers)

●Low ambient temperature. Wear warm gloves to

protect your hands.

●Holding the device too tightly hindering blood circu-

lation.

●Continuous operation is more harmful than opera-

tion interrupted by work breaks.

You should see a doctor if using the device regularly

and for lengthy periods of time, and in the event of re-

peated occurrences of symptoms such as tingling in

the fingers or cold fingers.

Intended use

DANGER

Improper use

Danger of death from incision injuries

Only use the device for its proper use.

●The pole saw accessory is suitable for commercial

use.

●The accessory is intended for use with the MT 36 Bp

Multi-Tool.

●The device is intended for outdoor use only.

●For safety reasons, always hold the device firmly

with both hands.

●The device is intended for pruning and trimming

small branches and twigs high on a tree. The user

stands securely on the ground.

Any other use, e.g. when climbing, for pruning low

branches or for cutting material at ground level is pro-

hibited. The user shall be liable for hazards arising as a

result of improper use.

Environmental protection

The packing materials can be recycled. Please

dispose of packaging in accordance with the en-

vironmental regulations.

Electrical and electronic appliances contain valu-

able, recyclable materials and often components

such as batteries, rechargeable batteries or oil,

which - if handled or disposed of incorrectly - can

pose a potential threat to human health and the environ-

ment. However, these components are required for the

correct operation of the appliance. Appliances marked

by this symbol are not allowed to be disposed of togeth-

er with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found

at: www.kaercher.com/REACH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher MT CS 250-36 in the language / languages: All languages as an attachment in your email.

The manual is 17.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher MT CS 250-36 Manual

Product: