478490
11
Zoom out
Zoom in
Previous page
1/180
Next page
English 11
Caution
Safety devices protect the user and must not
be modified or bypassed.
The appliance switch prevents unintentional
operation of the appliance.
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appli-
ance.
When unpacking the product, make sure that
no accessories are missing and that none of
the package contents have been damaged. If
you detect any transport damages please
contact your dealer.
1 ON/OFF switch for appliance
2 Power cable with plug
3 High pressure connection
4 High pressure hose
5 Trigger gun
6 Lock trigger gun
7 Connection for water supply with filter
8 Coupling element for water connection
9 Detergent Tank
10 Suction hose for detergent
11 Dosage regulator for detergent
12 Storage for accessories
13 Transport handle
14 Spray lance with pressure regulation
(Vario Power)
15 Spray lance with dirt blaster
Special accessories expand the possibilities
of using your appliance. Please contact your
Kärcher dealer for further information.
Illustrations on Page 2
Illustration
Mount loose parts delivered with appliance
prior to start-up.
Illustration
Î Pull out the clamp for the high-pressure
hose from the trigger gun (e.g. a small
screwdriver).
Î Connect high pressure hose to trigger
gun.
Î Push the clamp in until it locks. Check the
secure connection by pulling on the high-
pressure hose.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
Kärcher; or, as an alternative, a system sepa-
rator as per EN 12729 Type BA.
Note: Impurities in the water can damage the
high-pressure pump and accessories. For
protection, the use of the Kärcher water filter
(optional accessory, order no. 4.730-059) is
recommended.
Observe regulations of water supplier.
For connection values, see type plate/techni-
cal data.
Î Use a fibre-reinforced water hose (not in-
cluded) with a standard coupling. (Mini-
mum diameter 1/2 inch (13 mm),
minimum length 7.5 m).
Illustration
Î Screw the coupling unit (supplied) to the
water connection on the appliance.
Î Push the water supply hose onto the cou-
pling unit, then connect it to the water sup-
ply.
This high-pressure cleaner is suited to work
with the Kärcher suction hose with backflow
valve (Optional accessory, order no. 4.440-
238) to draw in surface water, e.g. from water
butts or ponds (see specifications for max.
suction height).
Î Fill the Kärcher suction hose with backflow
valve with water, screw to water supply
and hang into he water butt.
Safety Devices
Power switch
Lock trigger gun
Commissioning and operation
Description of the Appliance
Special accessories
Before Startup
Water supply
Water supply from mains
Drawing in water from open reservoirs
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher K4.900M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K4.900M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info