478485
15
Zoom out
Zoom in
Previous page
1/196
Next page
English 15
ƽ
Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
The appliance is maintenance-free.
Prior to longer periods of storage, e.g. in the
winter:
Î Completely drain all water from the appli-
ance: Switch the appliance on with de-
tached high-pressure hose and detached
water supply (max. 1 minute) and wait, un-
til no more water exits at the high-pressure
connection. Turn off the appliance.
Î Remove filter from suction hose for deter-
gent and clean under running water.
Î Pull out the sieve in the water connection
using flat-nose pliers and clean under run-
ning water.
Caution
Protect the appliance and its accessories
against frost.
The appliance and its accessories can get de-
stroyed through frost if there are any water
residues in them. To avoid damage to them:
Î Store the appliance and the entire acces-
sories in a frost-safe room.
Use only original Kärcher spare parts. You will
find a list of spare parts at the end of these op-
erating instructions.
You can rectify minor faults yourself with the
help of the following overview.
If in doubt, please consult the authorized cus-
tomer service.
ƽ Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.
Î Check whether the voltage indicated on
the type plate corresponds to the voltage
of the mains supply.
Î Check the mains connection cable for
damages.
Î Check setting at the spray lance.
Î Appliance ventilation: Switch the appli-
ance on with the high-pressure hose de-
tached and operate until the water exits
the high-pressure connection without bub-
bles. Switch off appliance and reconnect
high-pressure hose.
Î Check the water supply.
Î Pull out the sieve in the water connection
using flat-nose pliers and clean under run-
ning water.
Cause: Voltage reduction due to weak mains
supply or when using an extension cable.
Î When switching on, first pull the lever of
the trigger gun and then switch the appli-
ance switch to "I/ON".
Î Clean high-pressure nozzle: Remove dirt
and debris from the nozzle bore, using a
needle and rinse through with water to-
wards the front.
Î Check water flow quantity.
Î Slight leakage from the appliance pump is
normal. If the leakage increases contact
the authorized customer service.
Maintenance and care
Maintenance
Storage
Frost protection
Spare parts
Troubleshooting
Appliance is not running
Pressure does not build up in the appli-
ance
Appliance does not start, motor hums
Strong pressure fluctuations
Appliance is leaking
15


Need help? Post your question in this forum.

Forumrules
1

Forum

karcher-k4.86m

Reset search

  • Saludos quiero saver de cuanto es capacitor que yeva la carchet 4.86m Submitted on 7-8-2021 at 18:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher K4.86M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K4.86M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info