478388
12
Zoom out
Zoom in
Previous page
1/42
Next page
English K 3001
8
Preparing the cleaner
for use
Release both locking knobs (turn clockwise),
and lift motor housing off dirt box.
Push both wheels onto their mountings until
they snap into place.
Push both swivel castors onto their mountings
until they snap into place.
Push the accessory holder into its mounting
until it snaps into place.
n Put the motor housing on the dirt box and
lock it in place (turn the locking knobs
counter-clockwise as far as possible).
Connecting the accessories
Insert spraying and suction hose, and press
until it snaps into place.
Connect coupling on spraying and suction
hose, and press until it snaps into place
Attach required accessory to spraying and
suction hose or to suction tubes. If necessary
engage the catch.
Note: The appropriate additional accessory to be fitted
depends upon the actual cleaning task. Read the next
section of these instructions for further information.
How to use the cleaner
Wet cleaning
Carpets/Hard surfaces
(Spraying on cleaning agents and vacuuming
them off in one continuous process)
Attention: Do not clean parquet floors in this way
(moisture can penetrate the material and damage the
floor).
Accessories required
Spraying and suction hose with handle
Suction tubes (e.g. for cleaning the floor)
Spray-hex nozzle without hard-surface
adapter for carpets
Spray-hex nozzle with hard-surface adapter
for hard surfaces.
Mixing a detergent solution
Attention: Avoid any damage to health or property
by observing all the information provided with the
cleaning agents that are to be used.
n Removal of mites:
To eliminate mites we recommend our
specially developed cleaning agent Mitex RM
765 **. Depending on the textile type, tests
show that mites are removed for 6 - 9
months.
n For cleaning please use only the original
Kärcher cleaning agent RM760 **. This is
suitable for all textile cleaning processes.
n Dissolve half of the supplied test pack (or 1/2
the RM 760 measuring beaker) in 5 litres of
water and pour this mixture into the detergent
reservoir.
Getting started
Empty dirt box
Fit detergent reservoir
Mount motor housing onto dirt box, and lock
in place
Plug into mains socket
Switch on suction turbine
Switch on spray pump
Attention: If the detergent reservoir is empty, switch
off the spray pump (pump could become damaged). If
you are not working with the pump, switch this off at
the ON/OFF switch.
To spray detergent – press and hold button
on handle.
Place spray-hex nozzle on floor, and draw
backwards along surface to be cleaned. Tiles
are best cleaned diagonally across the joints.
** Special accessory
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher K3001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K3001 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info