Manual Karcher K 6.91 MD PLUS (page 16 of 224) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78313

Zoom out

Zoom in

1/224

16 English

Mount loose parts delivered with appliance

prior to start-up.

Illustrations on fold-out

pages!

Illustration

Î Insert the transport handle and screw

in.

Î Insert holder for trigger gun.

Illustration

Î Connect the suction hose for detergent

to the dosage regulator.

Illustration

Î Lock the dosage regulator for detergent

into the cover.

Illustration

Î Insert the cover and screw in.

Illustration

Î Pull the suction hose for detergent

through the cover of the detergent tank

until the filter contacts teh bottom of the

tank.

Illustration

Î Close the detergent tank with the lid.

Î Lock the detergent tank in place on the

appliance.

Illustration

Î Attach the accessories holder.

Illustration

Î Fasten the quick coupling for the high

pressure hose to the high pressure con-

nection.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply

without a system separator. Use a

suitable system separator manufactured by

KÄRCHER; or, as an alternative, a system

separator as per EN 12729 Type BA. Water

flowing through a system separator is con-

sidered non-drinkable.

Note: Impurities in the water can damage

the high-pressure pump and accessories.

For protection, the use of the KÄRCHER

water filter (optional accessory, order no.

4.730-059) is recommended.

Observe regulations of water supplier.

For connection values, see type plate/tech-

nical data.

Î Use a fibre-reinforced water hose (not

included) with a standard coupling.

(Minimum diameter 1/2 inch (13 mm),

minimum length 7.5 m).

Î Screw the coupling unit (supplied) to

the water connection on the appliance.

Î Push the water supply hose onto the

coupling unit, then connect it to the wa-

ter supply.

This high-pressure cleaner is suited to work

with the KÄRCHER suction hose with back-

flow valve (Optional accessory, order no.

4.440-238) to draw in surface water, e.g.

from water butts or ponds (see specifica-

tions for max. suction height).

Î Fill the KÄRCHER suction hose with

backflow valve with water, screw to wa-

ter supply and hang into he water butt.

Î Separate the high pressure hose from

the high pressure connection of the ap-

pliance.

Î Switch the appliance on "I/ON" and op-

erate until the water exits the high-pres-

sure connection without bubbles.

Î Turn off the appliance "0/OFF".

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 6.91 MD PLUS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 6.91 MD PLUS Manual

Product: