Manual Karcher K 5.55 Jubilee (page 11 of 172) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

478516

Zoom out

Zoom in

1/172

Deutsch 5

When unpacking the product, make sure that no

accessories are missing and that none of the

package contents have been damaged. If you

detect any transport damages please contact

your dealer.

Illustrations on Page 2

1 Transport handle

2 Storage for spray lance

3 Mains cable with mains plug

4 Connection for water supply with filter

5 Coupling element for water connection

6 High pressure hose

7 High pressure connection

8 Appliance switch "0/OFF“/ „I/ON“

9 Storage for high-pressure hose

10 Detergent Tank

11 Suction hose for detergent

12 Storage for trigger gun

13 Lock trigger gun

14 Trigger gun

15 Spray lance with pressure regulation (Vario

Power)

16 Spray lance with Dirtblaster

Special accessories expand the possibilities of

using your appliance. Please contact your

KÄRCHER dealer for further information.

Illustration

Mount loose parts delivered with appliance prior

to start-up.

Illustration

Î Connect high pressure hose to trigger gun.

Î Push the high pressure hose into the trigger

gun until it locks audibly.

Note: Make sure the connection nipple is

aligned correctly.

Î Check the secure connection by pulling on

the high-pressure hose.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply with-

out a system separator. Use a suitable

system separator manufactured by KÄRCHER;

or, as an alternative, a system separator as per

EN 12729 Type BA. Water flowing through a sys-

tem separator is considered non-drinkable.

Note: Impurities in the water can damage the

high-pressure pump and accessories. For pro-

tection, the use of the KÄRCHER water filter (op-

tional accessory, order no. 4.730-059) is

recommended.

Observe regulations of water supplier.

For connection values, see type plate/technical

data.

Î Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Minimum

diameter 1/2 inch (13 mm), minimum length

7.5 m).

Î Screw the coupling element (supplied) to the

water connection on the appliance.

Î Push the water supply hose onto the cou-

pling unit, then connect it to the water supply.

This high-pressure cleaner is suited to work with

the KÄRCHER suction hose with backflow valve

(Optional accessory, order no. 4.440-238) to

draw in surface water, e.g. from water butts or

ponds (see specifications for max. suction

height).

Î Fill the KÄRCHER suction hose with back-

flow valve with water, screw to water supply

and hang into the water butt.

Î Separate the high pressure hose from the

high pressure connection of the appliance.

Î Switch the appliance on (I/ON) for a max. of

2 minutes and wait until the water exits the

high-pressure connection without bubbles.

Î Turn off the appliance "0/OFF".

Operation

Description of the Appliance

Special accessories

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

English 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 5.55 Jubilee in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 5.55 Jubilee Manual

Product: