Manual Karcher k 470 m (page 19 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

382180

Zoom out

Zoom in

1/112

English

Water supply

Caution! Impurities in the intake water damage the

pump. To prevent this we expressly urge you to use

the Kärcher water filter (order no. 4.730-097).

The operation of the high-pressure cleaner with a

closed water supply line causes damage to the cylinder

head unit. Please never operate the high-pressure

cleaner with a closed water supply tap.

The unit can either be supplied from the water main

or from water in an open container.

Water supply from the water main

• Connect a supply hose (not included) to the water

inlet of the unit and to the water supply (e.g. water

tap).

• Open the water supply.

Water supply from an open container

• Unscrew the coupling part for the water inlet.

• Screw the suction hose with filter (not included,

see “Special accessories”) onto the water connec-

tion of the unit.

• Hang the filter in the container.

• Vent the unit before operation.

– Unscrew the high-pressure line at the high-pres-

sure outlet of the unit.

– Switch on the unit and let it run until water free

of bubbles emerges at the high-pressure out-

let.

– Switch off the unit and screw on the high-pres-

sure hose again.

Preparation

• Insert power plug.

• Turn master switch to “I”.

Switching on

• Press safety button on the handgun and pull the

lever.

Switching off

• Release the lever.

During breaks in work and when leaving the unit

secure it against inadvertent switching on by pres-

sing the safety button.

Regulate operating pressure

Raise operating pressure:

• twist spray lance in direction

Reduce operating pressure:

• twist spray lance in direction

Adding the cleaning agent

• Draw the cleaning agent suction hose out of the

housing to the required length.

• Hang the cleaning agent suction hose in the cle-

aning agent container.

• Twist the spray lance in the “ ” direction until

the stop.

If cleaning agent has been added:

• Hang the cleaning agent suction hose in a container

of clear water, switch on the unit for about one mi-

nute and flush through.

Recommended cleaning method

1. Spray the cleaning agent on the dry surface spa-

ringly and let it react (but not dry out).

2. Wash off the loosened dirt with the high-pressu-

re jet.

Connect accessories

Depending on the model the following accessories

are either included in the scope of delivery or are

obtainable from specialist dealers (see also “Spe-

cial accessories”).

• Exchange the respective accessory with the spray

lance.

Wash brush

for large, smooth surfaces – e.g. on the automobile,

caravan or boat.Cleaning agent can be added.

Rotating wash brush

for gentle and thorough cleaning – e.g. bodywork and

glass surfaces.

Cleaning agent can be added.

Rotary nozzle

for stubborn accumulations of grime – e.g. moss-

covered promenade tiles or facades.

Work without cleaning agent and with the highest

operating pressure.

Finishing operations

• Master switch to “0”.

• Draw out power plug.

Water supplied from the water main

• Close the water supply tap.

• Separate the unit from the water connection.

Water supplied from an open container

• Unscrew the suction hose with filter at the water

inlet of the unit.

• Pull the lever on the handgun until the unit is wi-

thout pressure.

• Press in the safety button to protect the unit against

inadvertent switching on.

Safekeeping

Caution! Frost can destroy an incompletely emp-

tied unit. In the winter keep the unit in a frost-free

room.

• Separate the spray lance from the handgun.

• Wind up the power cord and, for example, hang it

around the handgun.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher k 470 m in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher k 470 m Manual

Product: