Manual Karcher K 4.700 (page 18 of 258) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460687

Zoom out

Zoom in

1/258

- 5

ṇ

Warning

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply

without a system separator. Use a

suitable system separator manufactured by

KÄRCHER; or, as an alternative, a system

separator as per EN 12729 Type BA. Water

flowing through a system separator is consid-

ered non-drinkable.

Caution

Always connect the system separator to the

water supply, never directly to the appliance!

Note: Impurities in the water can damage the

high-pressure pump and accessories. For

protection, the use of the KÄRCHER water fil-

ter (optional accessory, order no. 4.730-059)

is recommended.

Observe regulations of water supplier.

For connection values, see type plate/techni-

cal data.

 Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Minimum

diameter 1/2 inch (13 mm), minimum length

7.5 m).

 Illustration

Screw the coupling element (supplied) to

the water connection on the appliance.

Push the water supply hose onto the cou-

pling unit, then connect it to the water sup-

ply.

This high-pressure cleaner is suited to work

with the KÄRCHER suction hose with back-

flow valve (Optional accessory, order no.

4.440-238) to draw in surface water, e.g. from

water butts or ponds (see specifications for

max. suction height).

 Fill the KÄRCHER suction hose with

backflow valve with water, screw to water

supply and hang into the water butt.

 Appliance ventilation: Switch the appli-

ance on with the high-pressure hose de-

tached and operate (max. 2 minutes) until

the water exits the high-pressure connec-

tion without bubbles. Switch off appliance

and reconnect high-pressure hose.

Caution

Dry runs lasting longer than two minutes lead

to damages to the high pressure pump. If the

appliance does not build up pressure within

two minutes, switch it off and proceed as in-

structed in the Chapter "Troubleshooting".

 Illustration

Push the spray lance into the trigger gun

and fasten it by turning it through 90°.

 Illustration

Unwind the high pressure hose from the

hose drum. Hold on to the transport han-

dle during this procedure.

Note: If the hand crank is in its secured

position, fold it up first.

 Completely open the water tap.

 Insert the mains plug into the socket.

 Turn on the appliance “I/ON”.

ṇ Danger

The trigger gun is subjected to a recoil force

when the water jet is discharged. Make sure

that you have a firm footing and are also hold-

ing the trigger gun and spray lance firmly.

Caution

Prior to cleaning, make sure that the high

pressure is placed safely on level ground.

Wear protective goggles and protective cloth-

ing during the cleaning process.

 Unlock the lever on the trigger gun.

 Pull on the lever of the trigger gun; the de-

vice will switch on.

Note: Release the lever of the trigger gun; the

device will switch off again. High pressure re-

mains in the system.

Carrying out the most common cleaning

tasks. The work pressure can be stagelessly

regulated between "Min" and "Max".

 Release the lever on the trigger gun.

 Turn the spray lance to the desired posi-

tion.

Note: Suitable for working with detergent; for

this, turn the spray lance to the "Mix" position.

Water supply

Water supply from mains

Drawing in water from open reservoirs

Start up

Operation

Spray lance with pressure regulation

14 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 4.700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 4.700 Manual

Product: