460693
19
Zoom out
Zoom in
Previous page
1/112
Next page
English
19
line must not lie in the water.
!
All current-carrying components within the working area
must be jet-proof.
- The appliance may only be connected to an elec-
trical connection that was performed by an electri-
cian according to IEC 60364.
- Only connect the appliance to alternating current.
The voltage must comply with the voltage specified
on the typeplate.
- Minimum fuse protection of the socket 10 A (delay-
action fuse).
- To avoid electric accidents, we recommend to use
sockets with a series connected residual current
operated device (rated breaking current max. 30
mA).
-
Warning:Warning:
Warning:Warning:
Warning: Inappropriate extension lines may be
dangerous. If you work outside, only use extension
lines that are approved and specifically labelled and
provide of a sufficient conductor cross section:
1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²
1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²
1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²
- The plug and the coupling of an extension line must
be waterproof.
- Always unwind the extension line completely from
the cable drum.
Connection to the Water Conduit
Please observe the provisions of the local water sup-
ply company.
Only use supply hoses (not included in the delivery)
with the following dimensions:
- minimum length 7.5 m
- minimum diameter ½‘‘
Please see the typeplate or the section ”Specificati-
ons” for the connection values.
Operation
!
Danger of life!
Vehicle tyres/tyre valves may be damaged and burst
by the high-pressure jet. A first sign is the discolora-
tion of the tyre. Damaged vehicle tyres/tyre valves
are hazardous. Always perform the cleaning with a
distance of at least 30 cm. Never touch the mains
plug with wet hands. Check the power cord and the
mains plug for damages prior to each use of the
appliance. If the power cord is damaged, please ar-
range immediately for the exchange by an authorized
customer service or a skilled electrician.
Check the high-pressure hose for damages prior to
each use of the appliance. If the high-pressure hose
is damaged, replace it immediately.
!
Danger of injury! Danger of injury!
Danger of injury! Danger of injury!
Danger of injury!
Due to the water jet emerging from the high-pressure
nozzle, a recoil force acts on the trigger gun. Always
ensure a stable standing position and hold the trigger
gun and the spray jet firmly.
If necessary, wear protective clothes for the protec-
tion from return spray.
Water Supply from the Water Main
• Connect a supply hose (not included in the delivery)
to the water connection of the appliance and to the
water supply.
Open the water supply.
Water Supply from an Open Container
Unscrew the coupling unit for the water intake.
• Fasten the suction hose with the filter (not included
in the delivery, see ”Special Accessories”) with screws
on the water connection of the appliance.
Insert the filter into the container.
Deaerate the appliance before using it.
• Unscrew the high-pressure line at the high-pressu-
re connector of the appliance.
• Turn on the appliance and let it run until bubble-free
water emerges at the high-pressure connector.
• Turn off the appliance, and fasten the high-pressu-
re hose with screws.
Preparing the Appliance
Insert the mains plug.
Set the main switch to ”I”.
Turning On the Appliance
• Press the safety button on the trigger gun, and pull
the lever.
Turning Off the Appliance
Release the lever.
Press the safety button to prevent the appliance from
being inadvertently turned on during breaks or if you
leave the appliance.
Selecting the Working Pressure
Increasing the working pressure:
Turn the jet spray lance in the ”
++
++
+” direction.
Decreasing the working pressure:
Turn the jet spray lance in the ”
–” direction.
Adding the Detergent
Pull the desired length of the detergent suction hose
out of the housing.
• Insert the detergent suction hose into the detergent
container.
Turn the jet spray lance into the ”
–” direction until
you reach the stop.
If detergent has been added:
• Put the detergent suction hose into a container with
clear water, turn on the appliance for approximately
1 minute, and perform a clear rinsing.
Recommended Cleaning Method
1.Spray a small dose of the detergent on the dry sur-
face, and allow it to react (make sure the detergent
does not dry up).
2.Wash off the loosened dirt using the high-pressure
jet.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher K 3.85 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 3.85 M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info