Manual Karcher K 3.20 M PLUS + T200 (page 11 of 176) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78132

Zoom out

Zoom in

1/176

English 11

When unpacking the product, make sure that

no accessories are missing and that none of

the package contents have been damaged. If

you detect any transport damages please

contact your dealer.

Illustrations on Page 2

1 Appliance switch "0/OFF“/ „I/ON“

2 Mains cable with mains plug

3 High pressure connection

4 High pressure hose

5 Hand blowing gun

6 Lock trigger gun

7 Sieve in the water connection

8 Water connection

9 Coupling element for water connection

10 Detergent suction hose (with filter)

11 Storage for trigger gun

12 Transport handle

13 Spray lance with pressure regulation

(Vario Power)

14 Spray lance with dirt blaster

Special accessories expand the possibilities

of using your appliance. Please contact your

Kärcher dealer for further information.

Mount loose parts delivered with appliance

prior to start-up.

Illustration

Î Pull out the clamp for the high-pressure

hose from the trigger gun (e.g. a small

screwdriver).

Î Connect high pressure hose to trigger

gun.

Î Push the clamp in until it locks. Check the

secure connection by pulling on the high-

pressure hose.

Illustration

Î Insert the transport handle and screw in.

Illustration

Î Insert holder for trigger gun.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water net with-

out a system separator. Use a suita-

ble system separator manufactured by

Kärcher; or, as an alternative, a system sepa-

rator as per EN 12729 Type BA.

Note: Impurities in the water can damage the

high-pressure pump and the accessories. For

protection, the use of the Kärcher water filter

(optional accessory, order no. 4.730-059) is

recommended.

Observe regulations of water supplier.

For connection values, see type plate/techni-

cal data.

Î Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Mini-

mum diameter 1/2 inch (13 mm),

minimum length 7.5 m).

Illustration

Î Screw the coupling unit (supplied) to the

water connection on the appliance.

Î Push the water supply hose onto the cou-

pling unit, then connect it to the water sup-

ply.

This high-pressure cleaner is suited to work

with the Kärcher suction hose with backflow

valve (Optional accessory, order no. 4.440-

238) to draw in surface water, e.g. from water

butts or ponds (see specifications for max.

suction height).

Î Fill the Kärcher suction hose with back-

flow valve with water, screw to water sup-

ply and hang into he water butt.

Î Separate the high pressure hose from the

high pressure connection point of the ap-

pliance.

Î Switch the appliance on "I/ON" and oper-

ate until the water exits the high-pressure

connection without bubbles.

Î Turn off the appliance "0/OFF".

Operation

Description of the Appliance

Special accessories

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 3.20 M PLUS + T200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 3.20 M PLUS + T200 Manual

Product: