Manual Karcher K 2.36 M (page 12 of 184) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78195

Zoom out

Zoom in

1/184

- 5

Caution

Safety devices protect the user and must not be

modified or bypassed.

The appliance switch prevents unintentional op-

eration of the appliance.

This lock locks the lever of the trigger gun and

prevents the inadvertent start of the appliance.

The overflow valve prevents the permissible

working pressure from being exceeded.

If the lever on the trigger gun is released the

pressure switch turns off the pump, the high-

pressure jet is stopped. If the lever is pulled the

pump is turned on again.

Caution

Create stability for the appliance prior to all work

on or with the appliance to prevent accidents or

damage.

– The stability of the appliance is warranted

when it is placed onto an even surface.

The scope of delivery of your appliance is illustrat-

ed on the packaging. Check the contents of the ap-

pliance for completeness when unpacking.

In the event of missing accessories or any trans-

port damage, please contact your dealer.

Illustrations on Page 2

1 High pressure connection

2 Detergent suction hose (with filter)

3 Appliance switch "0/OFF“/ „I/ON“

4 Storage for high-pressure hose

5 Transport handle

6 Storage for spray lance

7 Storage for trigger gun

8 Mains cable with mains plug

9 Water connection

10 Bearing wheel

11 Coupling element for water connection

12 Trigger gun

13 Lock trigger gun

14 High pressure hose

15 Clamp for high pressure hose

16 Spray lance with high pressure nozzle

17 Spray lance with Dirtblaster

Special accessories expand the possibilities of

using your appliance. Please contact your

KÄRCHER dealer for further information.

Mount loose parts delivered with appliance prior

to start-up.

Illustrations on Page 2

Illustration

Î Insert the transport wheels and lock them.

Illustration

Î Pull out the clamp for the high-pressure hose

from the trigger gun (e.g. a small screwdriver).

Illustration

Î Connect high pressure hose to trigger gun.

Î Push the clamp in until it locks. Check the se-

cure connection by pulling on the high-pres-

sure hose.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply with-

out a system separator. Use a suitable

system separator manufactured by KÄRCHER;

or, as an alternative, a system separator as per

EN 12729 Type BA. Water flowing through a sys-

tem separator is considered non-drinkable.

Caution

Always connect the system separator to the wa-

ter supply, never directly to the appliance!

Note: Impurities in the water can damage the

high-pressure pump and accessories. For pro-

tection, the use of the KÄRCHER water filter (op-

tional accessory, order no. 4.730-059) is

recommended.

Observe regulations of water supplier.

For connection values, see type plate/technical

data.

Î Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Minimum

diameter 1/2 inch (13 mm), minimum length

7.5 m).

Î Screw the coupling element (supplied) to the

water connection on the appliance.

Î Push the water supply hose onto the cou-

pling unit, then connect it to the water supply.

Safety Devices

Power switch

Lock trigger gun

Overflow valve with pressure switch

Prerequisites for the appliance's

stability

Operation

Scope of delivery

Description of the Appliance

Special accessories

Before Startup

Water supply

Water supply from mains

12 EN

we have just tried to use this and the connector hose to the gun keeps disconnecting - are we doing something wrong Submitted on 17-4-2022 at 13:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 2.36 M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 2.36 M Manual

Product: