Manual Karcher K 2 Premium Power Control (page 11 of 134) (All languages)

803386

Zoom out

Zoom in

1/134

English 11

High-pressure gun lock

The lock locks the lever of the high-pressure gun and

prevents the device from starting unintentionally.

Auto-stop function

If the lever of the high-pressure gun is released, the

pressure switch turns off the pump and the high-pres-

sure jet stops. The pump switches on again when the le-

ver is pressed.

Symbols on the device

Assembly

For the illustrations, refer to the graphics page.

Fit the supplied loose parts onto the device before start-

ing up the device.

Fitting the wheels

1. Fasten and secure the wheels to the device.

Illustration B

Installing the handles

1. Attach the transport handle.

2. Attach the carrying handle.

Illustration C

Close the detergent tank

1. Close the detergent tank with the cover.

Illustration D

Installing the water connection coupling

1. Screw the water connection coupling onto the water

connection on the device.

Illustration E

Initial startup

1. Place the device on a flat and level surface.

2. Insert the high-pressure hose into the quick coupling

until it audibly latches into place.

Illustration F

3. Press the clamp for the high-pressure hose together

and pull out of the high-pressure gun.

Illustration G

4. Insert the high-pressure hose into the high-pressure

gun.

5. Press the clip in until it latches into place.

6. Check for a secure connection by pulling on the

high-pressure hose.

7. Plug the mains plug into a mains socket.

Water supply

For the connection values, see the type plate or chapter

Technical data.

Observe the water distribution company regulations.

ATTENTION

Damage through contaminated water

Contamination in the water can damage the pump and

the accessories.

KÄRCHER recommends using the KÄRCHER water fil-

ter for protection(special accessory, order number

4.730-059).

Connection to the water line

ATTENTION

Hose coupling with Aquastop on the water connec-

tion of the device

Damage to the pump

Never use a hose coupling with Aquastop on the water

connection of the device.

You can use an Aquastop coupling on the tap.

1. Plug the garden hose onto the water connection

coupling.

2. Connect the garden hose to the water line.

3. Open the water tap fully.

Illustration H

Operation

ATTENTION

Pump running dry

Damage to the device

If pressure does not build up in the device after 2 min-

utes then switch the device off and proceed according

to the instructions in chapter Troubleshooting guide.

Power Control System

Note

The sensitivity of materials can vary greatly depending

on age and condition. The recommendations are there-

fore not binding.

High-pressure operation

ATTENTION

Damage to painted or sensitive surfaces

Surfaces can be damaged when the jet is too close to

the surface or an unsuitable spray lance is used.

Maintain a minimum spray distance of 30 cm when

cleaning painted surfaces.

Do not clean car tyres, paint or sensitive surfaces such

as wood with the dirt grinder.

1. Insert a spray lance into the high-pressure gun and

lock it by turning it 90°.

Illustration I

2. Switch the device on ("I/ON").

3. Unlock the lever of the high-pressure gun.

4. Press the lever of the high-pressure gun.

The device switches on.

Do not aim the high-pressure jet may at per-

sons, animals, live electrical equipment or

the device itself.

Protect the device against frost.

The device may not be directly connected to

the public drinking water network

Display Pressure

level

Recommended for e.g.

HARD Stone terraces made of pav-

ing stones or washed con-

crete, asphalt, metal

surfaces, garden utensils

(wheelbarrow, spade, etc.)

MEDIUM Cars / motorcycles, brick

surfaces, plastered walls,

plastic furniture

SOFT Wooden surfaces, bicycle,

sandstone surfaces, rattan

furniture

MIX Operation with detergent

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 2 Premium Power Control in the language / languages: All languages as an attachment in your email.

The manual is 8.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 2 Premium Power Control Manual

Product: