Manual Karcher IVC 60-30 Tact 2 (page 10 of 124) (All languages)

804635

Zoom out

Zoom in

1/124

– 3

Note: 2 persons are required to remove the suction

head.

Unscrew the connection plug of the thermal probe

at the intermediate ring.

Release and remove the suction head.

Release and remove the filter cover.

Replace the flat pleated filter.

Insert and lock the filter cover.

Insert the suction head carefully, align and lock it.

Screw in the connection plug of the thermal probe

at the intermediate ring.

Pull the locks of the placement mechanics up.

Pull the push handle upward. The container is un-

locked and lowered.

Pull the container out by the handle.

Clean the thermal probe and the protective cover

with a moist cloth.

Reinsert the container and lock it with the push

handle.

DANGER

First pull out the plug from the mains before carrying out

any tasks on the machine.

Check cables, plugs, fuse, socket and thermal

probes.

Turn on the appliance.

Note: With correct direction of rotation a strong airflow

can be felt out of the opening of the exhaust muffler. Air

is suctioned with incorrect rotation direction.

Illustration

Check the direction of rotation of the motor. Ex-

change the poles on the appliance plug if the rota-

tion direction is wrong.

Empty the container.

Check whether the protective cover is available

and the side opening of the protective cover points

to the right placement mechanics (see illustration of

appliance).

Clean the thermal probe and the protective cover

with a moist cloth.

Turn the appliance off and back on.

Clean the thermal probe and the protective cover

with a moist cloth.

Remove blockages in the suction nozzle, suction

tube, suction hose, or flat pleated filter.

Check the suction head and the receptacle for

proper seating.

Replace the flat pleated filter.

Lock the filter cover.

Check the proper installation position of the flat fold

filters.

Replace the flat pleated filter.

Clean the thermal probe and the protective cover

with a moist cloth.

Suction hose is not connected.

Suction hose used is too short (< 3m) or the diam-

eter is too large.

Inform Customer Service.

The warranty terms published by the relevant sales

company are applicable in each country. We will repair

potential failures of your appliance within the warranty

period free of charge, provided that such failure is

caused by faulty material or defects in manufacturing. In

the event of a warranty claim please contact your dealer

or the nearest authorized Customer Service center.

Please submit the proof of purchase.

Only use original accessories and spare parts, they en-

sure the safe and trouble-free operation of the device.

For information about accessories and spare parts,

please visit www.kaercher.com.

– Accessories are not included in the delivery. The

accessories for the device must be ordered sepa-

rately, depending on the application.

– The device's correct function is only ensured when

using suction hose nominal widths of DN40 and

DN50.

– You can procure the spare parts and the attach-

ments from your dealer or your KÄRCHER branch

office.

Exchanging the flat pleated filter

Clean the thermal probe

Troubleshooting

Suction turbine does not run

Vacuum turbine is running but the machine is

not sucking in dust/dirt

Suction turbine turns off

Suction turbine does not start again after the

container has been emptied

Suction capacity decreases

Dust comes out while vacuuming

Automatic shut-off (wet vacuum cleaning)

does not react

Automatic filter cleaning is not working

Automatic filter cleaning cannot be switched

off

Warranty

Accessories and Spare Parts

10 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher IVC 60-30 Tact 2 in the language / languages: All languages as an attachment in your email.

The manual is 3.83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher IVC 60-30 Tact 2 Manual

Product: