726212
19
Zoom out
Zoom in
Previous page
1/276
Next page
– 3
The water shortage safeguard prevents the burner
to be turned on when there is water shortage.
A sieve prevents the contamination of the safe-
guard and must be cleaned regular.
The temperature stop switches off the machine
when the waste gases have reached very high tem-
peratures.
WARNING
Risk of injury! Appliance, accessories, supply lines and
connections must be in fault-free condition. If they are
not in a perfect state then the appliance must not be
used.
Lock parking brake.
Figure 3
Screw tightening torque: 6.5-7.0 Nm
Figure 4
Hook the tool bag onto the top tabs on the appli-
ance.
Tilt the tool bag down and lock it into place.
Fasten the tool bag with 2 screws (torque: 6.5 -
7.0 Nm).
Note: 2 screws are left over.
Figure 5
Hook the hose drum onto the bottom tabs on the
appliance.
Tilt the hose drum up and lock it into place.
Fasten the hose drum with 4 screws (torque: 6.5 -
7.0 Nm).
Connect the connecting hose of the hose drum to
the high pressure connection point of the appli-
ance.
Note: The EASY!Lock system joins components with a
quick-fasten thread solidly and securely with just one
turn.
Figure 6
Join the spray lance with the trigger gun and tighten
until hand-tight (EASY!Lock).
Insert the high pressure nozzle onto the spray
lance.
Install union nut and hand-tighten it (EASY!Lock).
Appliance without hose drum:
Join the high-pressure hose with trigger gun and
high-pressure connection of the appliance and
tighten until hand-tight (EASY!Lock).
Device with hose drum:
Join the high pressure hose with trigger gun and
tighten until hand-tight (EASY!Lock).
ATTENTION
Risk of damage. Always unwind high-pressure hose
completely.
Figure 7
Completely roll off the high-pressure hose from the
hose drum.
Unlatch the fastening clamp for the high-pressure
hose and pull the hose out.
Slide the hose nipple all the way into the knot section of
the hose drum and secure with the fastening clamp.
Determining the hardness of tap water:
through the public water supply works,
using a hardness tester (order no. 6.768-004)
Note:
RM 110 prevents calcification of the heating coil in
the presence of hard water.
RM 111 prevents the formation of black water and
cares for the pump in the presence of soft water.
Note: Push the bottle in securely to penetrate the clo-
sure. Do not remove bottle until it is empty.
Note: A bottle of RM 110 system care is included in the
scope of delivery.
Replace the system care bottle.
DANGER
Danger of explosion! Only refill diesel oil or light fuel oil.
Inappropriate fuels, e.g. petrol, must not be used.
ATTENTION
Risk of damage! Never operate device with an empty
fuel tank. The fuel pump will otherwise be destroyed.
Refill fuel.
Close tank lock.
Wipe off spilled fuel.
DANGER
Risk of injury!
Use Kärcher products only.
Under no circumstances fill solvents (petrol, ace-
ton, diluting agent etc.)
Avoid eye and skin contact.
Observe safety and handling instructions by the de-
tergent manufacturer.
Kärcher offers an individual cleaning and care ap-
pliances program.
Your dealer will consult you gladly.
Refill detergent.
For connection values refer to technical specifications.
Connect the supply hose (minimum length 7.5 m,
minimum diameter 3/4“) to the water connection of
the unit and to the water inlet (e.g. tap) using the
water connection adapter.
Note: The supply hose is not included in the scope of
delivery.
Water shortage safeguard
Temperature stop for exhaust gases
Start up
Installing the handle
Install the tool bag (HDS C only)
Install the hose drum (HDS CX only)
Install the hand-spray gun, the jet pipe, the
nozzle and the high pressure hose
Installing spare high pressure hose
Device with hose drum
System care
Define system care
Water hardness
(°dH)
System care products to be used
<3 RM 111
>3 RM 110
Replace the system care bottle
Refill fuel
Refill detergent
Water connection
19EN
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 9-17-4 C-CX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 9-17-4 C-CX in the language / languages: All languages as an attachment in your email.

The manual is 7,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info