726171
22
Zoom out
Zoom in
Previous page
1/372
Next page
– 3
We would like to point out that the appliance must
be repeatedly checked by a skilled person as pre-
scribed by the applicable national regulations.
Please contact your KÄRCHER partner.
The appliance/accessories must not be modified.
Safety devices serve for the protection of the user and
must not be put out of operation or bypassed with re-
spect to their function.
While reducing the water supply at the pump head
or with the Servopress - regulation the overflow
valve opens and part of the water flows back to the
pump suck side.
If the hand-spray gun is closed, so that the whole
water flows back to the pump suck side, the pres-
sure switch at the overflow valve shuts down the
pump.
If the hand spray gun is opened, the pressure switch
on the cylinder head turns the pump back on.
The overflow valve is set by the manufacturer and
sealed. Setting only by customer service.
The safety valve opens, when the overflow valve
resp. the pressure switch is broken.
The safety valve is set by the manufacturer and sealed.
Setting only by customer service.
The water shortage safeguard prevents the burner
to be turned on when there is water shortage.
A sieve prevents the contamination of the safe-
guard and must be cleaned regular.
The temperature stop switches off the machine
when the waste gases have reached very high tem-
peratures.
WARNING
Risk of injury! Appliance, accessories, supply lines and
connections must be in fault-free condition. If they are not
in a perfect state then the appliance must not be used.
Lock parking brake.
Figure 3
ATTENTION
Hook the electric supply line into the cable guide of the
right handle bow. Be careful not to damage the cable.
Figure 4
Note: Push the bottle in securely to penetrate the clo-
sure. Do not remove bottle until it is empty.
Note: To protect the device, the burner is switched off 5
hours after the system care bottle is empty.
The system care prevents the calcification of the
heating spiral while operating with calciferous tap
water. It is dosed into the supply in the float con-
tainer drop by drop.
The metering is set to medium water rigidity by the
manufacturer
Note: A system care bottle is included in the delivery.
Replace the system care bottle.
Determining the hardness of tap water:
through the public water supply works,
using a hardness tester (order no. 6.768-004)
Set the service switch according to the water hard-
ness in the table.
Note:
RM 110 prevents calcification of the heating coil in
the presence of hard water.
RM 111 prevents the formation of black water and
cares for the pump in the presence of soft water.
DANGER
Danger of explosion! Only refill diesel oil or light fuel oil.
Inappropriate fuels, e.g. petrol, must not be used.
ATTENTION
Risk of damage! Never operate device with an empty
fuel tank. The fuel pump will otherwise be destroyed.
Refill fuel.
Close tank lock.
Wipe off spilled fuel.
DANGER
Risk of injury!
Use Kärcher products only.
Under no circumstances fill solvents (petrol, ace-
ton, diluting agent etc.)
Avoid eye and skin contact.
Observe safety and handling instructions by the de-
tergent manufacturer.
Kärcher offers an individual cleaning and care ap-
pliances program.
Your dealer will consult you gladly.
Refill detergent.
Note: The EASY!Lock system joins components with a
quick-fasten thread solidly and securely with just one
turn.
Figure 5
Join the spray lance with the trigger gun and tighten
until hand-tight (EASY!Lock).
Insert the high pressure nozzle onto the spray
lance.
Install union nut and hand-tighten it (EASY!Lock).
Safety Devices
Overflow valve with two pressure switches
Safety valve
Water shortage safeguard
Temperature stop for exhaust gases
Start up
Installing the handle
Attach the wheel caps
Replace the system care bottle
Adjusting the dosage of the system care
Advance RM 110/RM 111
Water hardness
(°dH)
Scale on the ser-
vice switch
System care
products to be
used
<3 3 (presetting) RM 111
3...7 1 RM 110
7...14 2 RM 110
14...21 3 (presetting) RM 110
>21 4 RM 110
Refill fuel
Refill detergent
Install the hand-spray gun, the jet pipe, the
nozzle and the high pressure hose
22 EN
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 7-12-4 M-MX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 7-12-4 M-MX in the language / languages: All languages as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info