538471
23
Zoom out
Zoom in
Previous page
1/318
Next page
English HDS Super, HDS 655, HDS 695 S, HDS 895 S, HDS 1195 23
Operation with cold water
Removal of slight contamination and rinsing
e.g.: Garden implements, terrace, tools, etc.
Set operating pressure as required
Set the temperature regulator (item 24) to "0"
Operation with hot water
* Danger of scalding
Set the temperature regulator (item 24) to the
required temperature
We recommend the following cleaning
temperatures
Slight contamination 30-50°C
Protein soiling, e.g. in foodstuffs industry
max. 60°C
Motor vehicle cleaning, machine cleaning
60-90°C
Operation with steam
At operating temperatures above 98°C
operating pressure must not exceed 32 bar.
Standard high-pressure nozzle is therefore
to be replaced with steam nozzle (part no.:
4.766-023, for HDS 1195 4.766-024; see
accessories) be replaced.
Set operating pressure to minimum value.
See Figure 9
Set the temperature regulator (item 24) to
min. 100°C
* Danger of scalding!
We recommend the following cleaning
temperatures
Preservative removal, extremely greasy dirt
100-110°C
Thawing of aggregates, certain facade
cleaning operations up to 140°C
EACH TIME AFTER USAGE
Warning!
Danger of scalding with hot water.
After operating it with hot water or steam the
unit must be cooled for at least two minutes by
operating it with cold water and its open
handgun.
Following operation with cleaning agent
Set the cleaning agent metering valve
(item 30) to "0"
Set the unit switch (item 23) to "I"
Actuate handgun and flush unit for
approx. 1 min
Stopping machine
Set the unit switch (item 23) to "0"
Shut off water supply
Switch the pump briefly on with the unit switch
(item 23) (approx. 5 sec.)
Remove mains plug from socket ONLY with
dry hands
Detach water connection
Actuate handgun to depressurise unit
Lock the hand spray gun Figure 8
Engage spray lance in cover holder
Reel up the high-pressure hose and electric
cables and attach them to fastenings
* Take care not to kink high-pressure hose and
cable!
Frost will destroy unit if water is not drained off
completely!
Store unit in a frost-free location
Observe the following if the unit is connected to
a flue:
Danger of damage caused by cold air entering
through the flue. Disconnect unit from flue at
outside temperatures below 0°C.
Take unit out of service if frost-free storage is
not possible.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 655 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 655 in the language / languages: All languages as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Karcher HDS 655

Karcher HDS 655 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info