Manual Karcher HDS 13-35 De Tr1 (page 26 of 512) (All languages)

726237

Zoom out

Zoom in

1/512

- 6

몇CAUTION

Risk of injury and damage! Note the weight

of the appliance in case of storage.

몇CAUTION

Risk of injury and damage! Observe the

weight of the appliance when you transport

it.

ATTENTION

Protect the trigger from damage during

transport.

Note: The driver operating the towing vehi-

cle with trailer on public roads must ensure

that he or she has the appropriate license

(driver license class) for this.

DANGER

When transporting the trailer in public traffic

with the water tank half full, the water can

swap out or the trailer could even tilt during

extreme steering manoeuvres.

Completely fill or empty the water tank.

Do not transport with the water tank half

full.

Close front and rear cover.

Adjust the height of the drawbar by

means of the support wheel to the

height of the trailer hitch of the towing

vehicle.

Attach the tear-off rope to the towing

vehicle.

A Trailer hitch opened

B Trailer hitch closed

Hitching the towing vehicle: Pull the

coupling lever up (open), place the

drawbar on the ball, push down the cou-

pling lever (close) until it is horizontal to

the drawbar.

Connect the connector of the vehicle

lighting.

Rotate the support wheel up by means

of the crank.

Make sure that the suppport wheel

points in the direction of the trailer when

retracted.

Remove the chocks from underneath

the wheels and place them in their hold-

ers.

Release parking brake.

Check the brake lights, direction indica-

tors, tail lights, and the license plate

lighting for proper function.

Check tyre contact face for foreign ob-

jects.

Check the condition of the tyres.

Check the tyre pressure, see mainte-

nance tasks.

Note: Local speed limits for vehicles with

trailers must be observed and adhered to.

DANGER

Risk of injury due to machine dropping.

–Adhere to the local accident prevention

guidelines and safety notes.

–Check the lifting unit for damage prior to

each transport by crane.

–The device must only be lifted on the

lifting eye.

–Protect the lifting device from inadvert-

ent load release.

–Do not transport any articles on the ap-

pliance during the lifting process.

–The appliance must only be transported

by properly trained crane personnel.

–Do not stand below the load.

–Ensure that no persons are present in

the immediate vicinity of the crane.

–Do not leave the appliance on the crane

unattended.

몇WARNING

Risk of injury! Appliance, accessories, sup-

ply lines and connections must be in fault-

free condition. If they are not in a perfect

state then the appliance must not be used.

ATTENTION

Always keep the installation site of the sys-

tem well ventilated to protect the machine

against over-heating.

ATTENTION

Risk of malfunctions and damages to the

appliance. The appliance must be in hori-

zontal position during operation.

– Choose the installation site in a way

that the exhaust gas opening is not cov-

ered.

Lock parking brake.

Lower the support wheel by means of

the crank.

Remove the tear-off rope from the tow-

ing vehicle.

Disconnect the connector from the ve-

hicle lighting and insert it into the plug

storage on the drawbar.

Secure the machine with wheel chocks

to prevent it from rolling away.

Disconnect the towing vehicle.

Align the appliance horizontally with the

support wheel.

Actuate front cover lock. Front cover

opens slightly.

Release the hook catch by pulling it out.

The front cover is swung up automati-

cally.

When closing, make sure the hook catch

engages.

Check oil level of the engine.

Do not operate the appliance if the oil level

has fallen below "MIN".

If required, top up oil carefully.

(see Chapter Care and Maintenance)

Check the oil level at the oil-level gauge

of the intermediate gear.

If required, top up oil carefully.

(see Chapter Care and Maintenance)

Check the oil level on the oil tank or the

oil dipstick of the high-pressure pump.

If required, top up oil carefully.

(see Chapter Care and Maintenance)

Check the fill level of the coolant in the

equalisation container of the motor

coolant with a cooled off motor. The liq-

uid level has to be between MIN and

MAX.

Refill coolant if necessary.

(see Chapter Care and Maintenance)

Check the antifreeze concentration in

the expansion tank.

If required refill antifreeze.

(see Chapter Care and Maintenance)

Check air filter.

Clean/replace the air filter if necessary.

(see Chapter Care and Maintenance)

– The liquid softener highly effectively

prevents the calcification of the heating

coil during operation with hard tap wa-

ter. It is dosed into the supply in the float

container drop by drop.

– The metering is set to medium water ri-

gidity by the manufacturer

Note: A sample bundle of liquid softener is

included in the delivery.

Open filling hole for liquid softener.

Refill liquid softener.

Close filling hole for liquid softener.

Storage

Transport

Trailer operation

Transport by crane

Safety instructions for transport by

crane

Start up

Install the device and align it

Open/close front cover

Motor

Intermediate gear

High-pressure pump

Coolant

Air filter

Refill liquid softener

26 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 13-35 De Tr1 in the language / languages: All languages as an attachment in your email.

The manual is 111,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher HDS 13-35 De Tr1 Manual

Product: