726230
30
Zoom out
Zoom in
Previous page
1/428
Next page
– 11
Operating speed of the engine is too
low
Check operating speed of the engine
(refer to technical data).
HDS 1000 BE: Spark plug (motor) is
dirty/ defective
Clean or replace the spark plug.
Nozzle is blocked/ washed out
Clean/ replace nozzle.
Sieve in the water connection is dirty
Clean sieve.
Amount of water supply is too low.
Check water supply level (refer to tech-
nical data).
Pipe inlets to pump are leaky or blocked
Check all inlet pipes to the pump.
Air within the system
Vent pump:
Set dosing value for detergent to "0".
Open the water supply.
Start the engine according to the oper-
ating instructions of the engine manu-
facturer.
To dearate the appliance, unscrew the
nozzle and allow the appliance to run
until the water exits in a bubble-free
state.
Switch off the appliance and fit the noz-
zle again.
Pump leaky
Note: 3 drops/minute are allowed.
With stronger leak, have device
checked by customer service.
Inlet pipes to the pump are leaky.
Check all inlet pipes to the pump.
Air within the system
Vent pump:
Set dosing value for detergent to "0".
Open the water supply.
Start the engine according to the oper-
ating instructions of the engine manu-
facturer.
To dearate the appliance, unscrew the
nozzle and allow the appliance to run
until the water exits in a bubble-free
state.
Switch off the appliance and fit the noz-
zle again.
Detergent suction hose with filter is
leaky or blocked
Check/ clean detergent suction hose
with filter.
Backflow valve in the connection of the
detergent suction hose is jammed
Clean/ replace backflow valve in the
connection of the detergent suction
hose.
Detergent dosing valve is closed or
leaky/ blocked
Open or check/clean detergent dosing
valve.
Nozzle is blocked
Clean the nozzle.
Appliance is decalcified
Decalcify appliance.
Sieve in the water shortage safe guard
is dirty
Clean sieve.
Overflow valve is defective
Replace overflow valve (Customer Ser-
vice).
Fuel tank empty
Refill.
Water shortage
Check water supply, check connections.
Clean sieve in the water shortage safe
guard.
Fuel filter dirty
Change fuel filter.
No ignition spark
If device is in use and no ignition spark
can be seen through the viewing glass,
have device checked by customer ser-
vice.
Device is not building up pressure
High pressure side is leaky
High pressure pump is vibrating
Device is not sucking in detergent
Overflow valve keeps switching on/
off when the hand-spray gun is
opened
Burner does not start
30 EN
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 1000 BE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 1000 BE in the language / languages: All languages as an attachment in your email.

The manual is 5,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info