726230

Karcher HDS 1000 BE Manual

27
Zoom out
Zoom in
Previous page
1/428
Next page
– 8
Open the water supply.
Set the appliance switch to operation
with cold/ hot water.
Start the engine according to the oper-
ating instructions of the engine manu-
facturer.
Release the trigger gun. To do so, push
the safety catch towards the back.
Open the hand spray gun.
Set the appliance switch to "Burner off".
DANGER
Scalding danger!
Set the appliance switch to the desired
working temperature (max. 98 °C). The
burner is switched on.
Set (+/-) the working pressure and
quantity by turning the pressure/ quan-
tity regulation mechanism at the hand
spray gun.
DANGER
Risk of injury! When adjusting the pressure/
quantity regulation, make sure that the
screw connection of the spray lance does
not become loose.
ATTENTION
Unsuitable detergents can cause damage
to the appliance and to the object to be
cleaned.
– For considerate treatment of the envi-
ronment use detergent economically.
– Observe the dosage and other instruc-
tions provided with these detergents.
– Use only those detergents approved by
the manufacturer of the appliance.
– Kärcher detergents ensure smooth
functioning. Please consult us or ask for
our catalogue or our detergent informa-
tion sheets.
Suspend end of suction hose in a con-
tainer filled with detergent.
Set dosing value for detergent to the
desired concentration.
Close the hand spray gun.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Note: If the trigger gun is closed, the motor
continues to run at idling speed. The water
thus circulates within the pump and heats
up. When the cylinder head at the pump
has reached the maximum permissible
temperature (80 °C), the safety thermostat
at the cylinder head switches off the motor.
The device can be restarted after cooling
down to below 50 °C.
Cooling can be hastened while using com-
pressed water from the water supply pipes:
Open the trigger gun for approx. 2 - 3
minutes so that the circulating water
cools down the cylinder head.
Restart the engine.
Set dosing value for detergent to "0".
Open the hand spray gun and rinse the
appliance for at least 1 minute.
DANGER
Danger of scalding from hot water! After op-
eration with hot water, the device must be
operated with opened handgun with cold
water for at least two minutes.
After operating the water using saline water
(sea water), open the hand spray gun and
rinse the appliance for at least 2 - 3 minutes
using tap water.
ATTENTION
Risk of damage! Never stop the motor un-
der full load when the trigger gun is opened.
Set the appliance switch to "Burner off".
Close the hand spray gun.
Motor regulates to reach dry run speed.
Set the appliance switch at the engine
to OFF and close the fuel supply valve.
Shut off water supply.
Turning on the Appliance
Operating with cold water
Operating with hot water
Set working pressure and flow rate
Operation with detergent
Interrupting operation
After operation with detergent
Turn off the appliance
27EN
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 1000 BE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 1000 BE in the language / languages: All languages as an attachment in your email.

The manual is 5,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info