726293

Karcher HDC 90-10 Advanced Manual

21
Zoom out
Zoom in
Previous page
1/376
Next page
- 5
DANGER
Risk of injury! Device, tubes, high pressure
hose and connections must be in faultless
condition. If they are not in a perfect state
then the appliance must not be used.
The operator must use the appliance cor-
rectly. When working with the appliance, he
must consider the local conditions and pay
due care and attention to other persons, in
particular children, who are nearby.
Never leave the appliance unattended
when it is in operation.
DANGER
–Danger of scalding by hot water! Do not
direct the water jet on persons or ani-
mals.
–Risk of burns on account of hot surfac-
es! Do not touch uninsulated pipes and
hoses when hot water operations are
on. Hold the jet pipe only at the handles.
–Risk of poisoning or itching on account
of detergent! Follow the given instruc-
tions for using detergents. Store deter-
gents safely and protect them against
access by unauthorised persons.
DANGER
Risk to life on account of electric shock! Do
not direct the water jet on the following
equipment:
–Electrical appliances and plants,
–the unit itself,
–all electricity-carrying parts in the work-
ing area.
There is a recoil pressure arising from the
water jet that comes out from the spray
pipe. The angular spray pipe brings about
an upward force.
DANGER
–Risk of injury! The recoil pressure of the
spray pipe can throw you off-balance.
You may fall. The spray jet can fly off
and cause damage to persons. Search
a secure place to stand and hold the
gun firmly. Never hold on tightly to the
lever of the hand spray gun.
–The jet must not be directed at other
persons or directed by the user at him/
herself to clean clothing or footwear.
–Risk of injury from parts flying off! Fly-
ing-off fragments or objects can injure
people or animals. Never direct the wa-
ter jet on fragile or loose objects.
–Risk of accident on account of damage!
Clean tyres and valves from a minimum
distance of 30 cm.
DANGER
Danger from substances that are harmful to
health! Do not spray the following materials
as they can swirl up substances that are
harmful to health:
–Materials containing asbestos,
–Materials that could contain substances
harmful to health.
DANGER
–Risk of injury on account of the emanat-
ing water jet that could be hot! Only
original Kaercher high pressure hoses
are optimally suited for the plant. No
guarantee can be given if you use any
other hoses.
–Detergents can prove to be a health
hazard! If any detergents are added,
the water let out of the plant is not of po-
table quality.
–Risk of hearing impairment while work-
ing on noise-making parts! If so, wear
ear plugs.
몇WARNING
Long hours of using the appliance can
cause circulation problems in the hands on
account of vibrations.
It is not possible to specify a generally valid
operation time, since this depends on sev-
eral factors:
– Proneness to blood circulation deficien-
cies (cold, numb fingers).
– Low ambient temperature. Wear warm
gloves to protect hands.
– A firm grip impedes blood circulation.
– Continuous operation is worse than an
operation interrupted by pauses.
In case of regular, long-term operation of
the device and in case of repeated occur-
rence of the symptoms (e.g. cold, numb fin-
gers) please consult a physician.
Note: The text is shown in English.
A Unlocking button
B LCD display
C Bar graph (approx. 20% of the nominal
pressure per field)
D Fault message pumps 1-4
E Change value (-) or move cursor to the
left
F Change value (+) or move cursor to the
right
G Acknowledgment button (OK)
H Cancel (ESC)
I System pressure
J Collective fault
K Water shortage
L The respective pump is switched on.
– When the system is ready to operate,
the current operating hours of the high
pressure pumps are shown alternating
with the operating pressure.
– When errors are triggered, these are
shown on the display as well (see "Help
with errors").
DANGER
Risk of injury on account of the emanating
water jet that could be hot!
DANGER
Check the high pressure hose for damage
before every use. Please arrange for the
immediate replacement of a damaged high
pressure hose.
Check high pressure hose, pipe con-
nections, fittings and water jet for dam-
age every time before use.
Check hose coupling to ensure that it
sits firmly and is leak-proof.
Turn the main switch to position “0”.
Shut off water supply.
Activate trigger gun until device is pres-
sure-less.
Open the water supply.
Turn the main switch to position “1”.
Press the unlocking key.
Perform the cleaning operation.
Note:If the cleaning break exceeds the set
delay time (min. 30 seconds), the appliance
will stop. At the same time, a adjustable op-
eration readiness period will be started.
Within this operation readiness period, the
appliance will automatically switch on be-
cause of the drop in pressure when the
hand spray gun is opened.
Start up
Operation
Safety instructions
!
Machine vibrations
Display
Making the plant ready for
operations
Switch-off in case of emergency
Turning on the Appliance
A B C D
E F G H I J K L
21EN
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDC 90-10 Advanced at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDC 90-10 Advanced in the language / languages: All languages as an attachment in your email.

The manual is 32,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info