726300
29
Zoom out
Zoom in
Previous page
1/384
Next page
- 13
The appliance is factory set to a pressure of
8 MPa (HDC 20/8) or 14 MPa (HDC 20/16).
1 Adjustment screw for high pressure
2 Lock nut for high pressure
3 Spindle of the pressure/quantity regula-
tion
4 Adjustment screw for low pressure
5 Locknut for low pressure
6 Housing of the overflow valve
Fasten the test manometer (part no.
4.742-025) to the high-pressure con-
nection.
Connect the high-pressure hose with
the servo press hand spray gun to the
test manometer.
Rotate the servo press to the "MIN" po-
sition, open the hand spray gun and let
the device run.
Rotate the spindle of the pressure/
quantity regulation to the stop.
Loosen the locknut for high pressure.
Turn the adjustment screw high pres-
sure so that the opening pressure of the
overflow valve plus 1.5 MPa is reached
on the test manometer.
Note: If this screw is turned clockwise, the
pressure is increased; and if it is turned
counter-clockwise, the pressure is de-
creased.
Secure the adjustment screw for high
pressure with the locknut.
Check working pressure and delivery
rate.
Seal the adjustment screw for high
pressure and the lock nut with locking
paint.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
5.957-926
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2016/04/01
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Setting the maximum working
pressure on the overflow valve
Adjusting the overflow valve
EU Declaration of Conformity
Product: High pressure cleaner
Type: 1.509-xxx
Type: 2.509-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards
EN 60335–1
EN 60335–2–79
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 61000–6–4
EN 61000–6–2: 2005
EN 61000–3–12: 2011
HDC 20/8, HDC 20/8 H:
EN 61000–3–3: 2013
HDC 20/16, HDC 20/16 H:
EN 61000–3–11: 2000
CEO Head of Approbation
Warranty
29EN
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDC 20-16 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDC 20-16 H in the language / languages: All languages as an attachment in your email.

The manual is 16,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info