726165
22
Zoom out
Zoom in
Previous page
1/340
Next page
– 6
Open the water supply.
Start the motor with the trigger gun
open according to the operating instruc-
tions of the motor manufacturer.
Note:
The spray lance can be removed to facili-
tate the start-up process.
Allow motor to warm up for 1 minute.
Release the trigger gun. To do so, push
the safety catch towards the back.
Open the hand spray gun.
Set the working pressure and quantity
by turning the pressure/ quantity regula-
tion mechanism at the pump unit.
Set (+/-) the working pressure and
quantity by turning the pressure/ quan-
tity regulation mechanism at the hand
spray gun.
DANGER
When adjusting the pressure/quantity regu-
lation, make sure that the screw connection
of the spray lance does not become loose.
DANGER
Switch the appliance off prior to replacing
nozzel and activate hand spray gun until
device is pressureless.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Unscrew nozzle screws and remove the
nozzle.
Put on a new nozzle.
Screw on the nozzle screws and tighten
them by hand.
WARNING
Unsuitable detergents can cause damage
to the appliance and to the object to be
cleaned. Use only those detergents that
have been approved by Kärcher. Observe
the dosage and other instructions provided
with these detergents. For considerate
treatment of the environment use detergent
economically.
Follow the safety instructions for using de-
tergents.
Kärcher detergents ensure smooth func-
tioning. Please consult us or ask for our cat-
alogue or our detergent information sheets.
Suspend end of suction hose in a con-
tainer filled with detergent.
Replace the high-pressure nozzle with
the low-pressure nozzle.
Set dosing value for detergent to the
desired concentration.
Set dosing valve for detergent to the de-
sired concentration (0%–6%).
Loosen the dirt:
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
Remove the dirt:
Spray off loosened dirt with the high
pressure jet.
Set dosing value for detergent to "0".
Open the trigger gun and rinse the de-
vice with the motor running for at least 1
minute.
Release the lever on the trigger gun.
Note: When the lever of the hand spray
gun is released, the engine continues to run
at zero speed.
In case of extended interruptions (sev-
eral minutes), switch off the engine.
Activate trigger gun until device is pres-
sure-less.
Secure the hand spray gun using the
safety catch so that it doesn't open ac-
cidentally.
Starting the machine
Set working pressure and flow rate
HD 9/21 G
HD 9/23 G
Replace the nozzle
Operation with detergent
Recommended cleaning method
After operation with detergent
Interrupting operation
22 EN
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 9-21 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 9-21 G in the language / languages: All languages as an attachment in your email.

The manual is 14,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info