Manual Karcher HD 7-18 C (page 21 of 384) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

459086

Zoom out

Zoom in

1/384

– 3

Î Mount the nozzle on the spray pipe (mark-

ings on the adjustment ring at the top).

Î Connect ray tube to hand spray gun

Note

Only with HD 7/10 CXF:

When space is limited, the enclosed adapt-

er with nozzle can be mounted directly to

the hand spray gun.

Î Loosen the clamps of the pushing handle.

Î Adjust the handle to the desired height.

Î Tighten the clamps of the pushing handle.

Î Fasten the high pressure hose to the

high pressure connection.

Î Insert the crank in the hose drum shaft

and lock it in.

Î Before rolling up, stretch out the high

pressure hose.

Î Wind the high pressure hose in uniform

layers on the hose drum by rotating the

crank. Select the rotation direction in

such a way that the high pressure hose

does not get bent.

ƽ Danger

Danger of injury by electric shock.

The appliance may only be connected to al-

ternating current.

The appliance may only be connected to an

electrical supply which has been installed in

accordance with IEC 60364.

The voltage indicated on the type plate

must correspond to the voltage of the elec-

trical source.

The minimum fuse rating required at the

socket outlet is (see technical specifica-

tions).

The highest allowed net impedance at the

electrical connection point (refer to techni-

cal data) is not to be exceeded. In case of

confusion regarding the power impedance

present on your connection, please contact

your utilities provider.

The appliance should always be connected to

the electrical mains using a plug. It is forbidden

to permanently connect the appliance to the

power supply. The plug is only for mains sepa-

ration.

Check the power cord with mains plug for dam-

age before every use. If the power cord is dam-

aged, please arrange immediately for the

exchange by an authorized customer service or

a skilled electrician.

The plug and coupling of the extension cable

used must be watertight.

Use the extension cord that has an adequate

cross-section (see "Technical Data") and un-

wind it fully from the cable drum.

Unsuitable extension cables can be hazardous.

Only use extension cables outdoors which

have been approved for this purpose and la-

belled with a sufficient cable cross section:

For connection values, see type plate/tech-

nical data.

ṇ Warning

Observe regulations of water supplier.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply

without a system separator. Use a

suitable system separator manufactured by

KÄRCHER; or, as an alternative, a system

separator as per EN 12729 Type BA. Water

flowing through a system separator is con-

sidered non-drinkable.

Caution

Always connect the system separator to

the water supply, never directly to the appli-

ance!

For connection values refer to technical

specifications

Î Connect the supply hose(minimu length 7.5

m, minimum diameter 1/2“) to the water

connection point of the machine and at the

water supply point (for e.g. a tap).

Attaching the Accessories

In devices without hose drum:

Start up

Electrical connection

Water connection

Connection to the water supply

21EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 7-18 C in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher HD 7-18 C Manual

Product: