459071
24
Zoom out
Zoom in
Previous page
1/372
Next page
– 7
Î Check oil level Please contact Custom-
er Service immediately if the oil is milky
(water in oil).
Î Clean the sieve in the water connection.
Î Clean filter at the detergent suck hose.
Clean the fine filter.
Î Unpressurize the appliance.
Î Unscrew the fastening screws of the
device hood; remove the device hood.
Î Unscrew lid with filter.
Î Clean the filter with clean water or com-
pressed air.
Î Reinstall in reverse sequence.
Î Oil change.
Note
See "Technical Details" for details of oil
quantity and type.
Î Unscrew the fastening screws of the
device hood; remove the device hood.
Î Remove the lid of the oil container.
Î Tilt the appliance forward.
Î Drain the oil in a collection basin.
Î Fill in new oil slowly; air bubbles should
go out.
Î Attach the lid of the oil container.
Î Fasten the device hood.
ƽ Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Get the electrical components checked and
repaired only by authorised customer serv-
ice persons.
Contact an authorised customer service
person in case of problems not mentioned
in this chapter or if you are in doubt or when
you have been explicitly asked to do so.
Î Check connection cable for damages.
Î Check the supply voltage.
Î Call Customer Service in case of elec-
trical defects.
Î Set nozzle to "High pressure".
Î Clean the nozzle.
Î Replace the nozzle.
Î Deaerate the appliance (see "Start-up")
Î Check water supply level (refer to tech-
nical data).
Î Clean the sieve in the water connection.
Î Check all inlet pipes to the pump.
Î Contact Customer Service if needed.
3 drops per minute are permitted and can
come out from the lower side of the appli-
ance. Call Customer Service if there is
heavy leakage.
Î With stronger leak, have device
checked by customer service.
Î Check suction pipes for water and de-
tergent and ensure that they are leak-
proof.
Î Close dosing valve for detergent to op-
erate the machine without detergent.
Î Deaerate the appliance (see "Start-up")
Î Contact Customer Service if needed.
Î Set nozzle to "CHEM".
Î Check/ clean detergent suction hose
with filter.
Î Open or check/clean detergent dosing
valve.
Î Contact Customer Service if needed.
Weekly
HD 9/20-4 only:
monthly or after 500 operating
hours
Oil change
Troubleshooting
Appliance is not running
Pressure does not build up in the
appliance
Pump leaky
Pump is vibrating
Detergent is not getting sucked in
24 EN
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 6-16-4 M Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 6-16-4 M Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info