726243
20
Zoom out
Zoom in
Previous page
1/296
Next page
– 7
Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
Pull the actuation lever of the parking
brake all the way to the back.
Press the actuation lever of the parking
brake completely to the front.
Connect the lifting device in the center
of the strut to load by crane.
DANGER
Risk of injury due to machine dropping.
Adhere to the local accident prevention
guidelines and safety notes.
Check the appliance for crane loading for
damage prior to each transport by crane.
Check the lifting unit for damage prior to
each transport by crane.
Only lift up the appliance by this mech-
anism when loading by crane.
Do not use stop chains.
Protect the lifting device from inadvert-
ent load release.
Remove the spray pipe with hand spray
gun as well as loose articles prior to
transporting by crane.
Do not transport any articles on the ap-
pliance during the lifting process.
The appliance must only be transported
by properly trained crane personnel.
Do not stand below the load.
Ensure that no persons are present in
the immediate vicinity of the crane.
Do not leave the appliance on the crane
unattended.
Check all screws of the appliance for
tightness; retighten if necessary.
During forklift transport, secure the device
against falling using the transport eyelets
according to the applicable guidelines.
When transporting in vehicles, secure the
device against slipping and tipping over ac-
cording to the applicable guidelines.
CAUTION
Risk of personal injury or damage! Consider
the weight of the appliance when storing it.
This appliance must only be stored in inte-
rior rooms.
DANGER
Risk of injury! Always switch off the appli-
ance and pull out the mains plug before
care and maintenance work.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract.
Please take advice on this matter.
Check mains cable.
The mains cable should not have been
damaged (risk of electrical shock). A
damaged mains cable must be replaced
immediately by an authorised Customer
Service Engineer or an electrician.
Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure hose.
Check oil level from the oil level display
of the high pressure pump.
Please contact Customer Service im-
mediately if the oil is milky (water in oil).
Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
Transport
Driving
Stopping
Transport by crane
Safety information about cranes
Safety check
Forklift transport
When transporting in vehicles
Storing the device
Care and maintenance
Maintenance
Safety inspection/ maintenance contract
Before each use
20 EN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 18-50-4 Cage Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 18-50-4 Cage Classic in the language / languages: All languages as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info