Manual Karcher HD 13-12-4 ST-H (page 24 of 168) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

726318

Zoom out

Zoom in

1/168

- 7

In order to guarantee a reliable operation of

the equipment, we success, you signed a

maintenance agreement. Please refer to

your local Kärcher service department.

Who may perform maintenance?

Operator

Work designated with the sign “Opera-

tor” may only be carried out by persons

who have been instructed in the safe

operation and maintenance on the high

pressure plant.

Electricians

Only persons with a professional train-

ing in the electro-technical area.

Customer Service

Work designated with the sign “Cus-

tomer Service” may only be done by the

fitters of Kärcher Customer Service.

WARNING

Risk of burns due to hot oil or hot parts of

the plant. Allow the pump to cool down for

minutes before oil change.

Note:

Used oil must only be disposed of by the

designated collection points. Please turn in

used oil there. Polluting the environment

with used oil is prosecutable.

For oil type refer to technical specifica-

tions.

1 Oil tank

2 Oil drain screw

Place the collection trough under the oil

drain screw.

Remove the lid of the oil container.

Unscrew the oil drain screw and collect

oil.

Fix in the oil drain screw and tighten it.

Slowly fill in new oil until the "MAX"

marking on the oil container.

Attach the lid of the oil container.

Dispose of old oil ecologically or turn it

in at a collection point.

Calcium deposits can lead to:

– higher pipe resistances

– even to failure of the components with

heavy calcium deposits

DANGER

–Risk of explosion due to combustible

gases! Smoking strictly prohibited dur-

ing decalcification. Ensure proper ven-

tilation.

–Risk of chemical burns on account of

acid! Wear protective glasses and pro-

tective gloves.

Note:

– Follow the specifications of the accident

prevention regulation BGV A1.

– Follow instructions for use on the lable

of the decalcifying agent.

According to statutory requirements, only

tested and approved boiler decrusting

agents may be used.

– RM 100 (Order No. 6.287-008) dis-

solves chalk and simple compounds of

chalk and detergents residues.

– RM 101 (Order No. 6.287-013) dis-

solves the deposits that cannot be dis-

solved using RM 100.

Note:

As an anti-corrosion measure and for neu-

tralising the acid residue, we recommend

that you finally pump an alkaline solution

through the machine (for e.g. RM 81) via

the detergent tank.

First decalcify the swimmer tank.

Shut off water supply.

Remove the lid of the swimming tank.

Remove the hose from the suction site

of the pump for the swimming tank on

the pump site.

Seal the free end of the hose.

Fill in 7 percent decalcification solution.

Remove resin completely from the tank

after decalcification.

Decalcify the high pressure installation:

Remove the high pressure hose from

the network supply and hang it in the

swimmer tank.

Run the calcium dissolving acid mixture

prepared in the tank through the instal-

lation's cycle, allow it to take effect,

rinse.

Maintenance contract

Maintenance Works

Oil change

Descaling

24 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 13-12-4 ST-H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher HD 13-12-4 ST-H Manual

Product: