725305
18
Zoom out
Zoom in
Previous page
1/320
Next page
– 4
DANGER
Risk of injury! Device, tubes, high pressure
hose and connections must be in faultless
condition. If they are not in a perfect state
then the appliance must not be used.
Lock parking brake.
Cut off tip of oil filling nozzle.
Check oil level of the high pressure
pump.
The oil level must be between the “MIN“
and “MAX“ markings on the oil container.
Add oil if required (see technical speci-
fications).
ATTENTION
Risk of damage! In case of lacteous oil inform
Kärcher customer service immediately.
Install the pushing handle on the pipe
frame.
Note: The EASY!Lock system joins com-
ponents with a quick-fasten thread solidly
and securely with just one turn.
Insert the high pressure nozzle onto the
spray lance.
Install union nut and hand-tighten it
(EASY!Lock).
Join the spray lance with the trigger gun
and tighten until hand-tight
(EASY!Lock).
Connect high pressure hose and spray
pipe to the hand spray gun.
For connection values refer to technical
specifications.
The electrical connections must be
done by an electrician according to IEC
60364-1.
The machine is equipped as standard
with an Ex plug. If the existing socket
does not match this plug, it must be ad-
justed accordingly by a technician.
WARNING
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal data) is not to be exceeded.
In case of any uncertainty regarding the
present net impedance at your connection
point, please contact your local power sup-
ply company.
DANGER
Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the socket.
Unsuitable electrical extension cables
can be hazardous. Only use electrical
extension cables outdoors which have
been approved and labelled for this pur-
pose and have an adequate cable
cross-section.
1 - 10 m: 2.5 mm2
10 - 30 m: 4 mm2
WARNING
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
Use a conductive (electrostatically)
hose (resistance R < 106 Ohm, not in-
cluded). Minimum diameter, 3/4 inch.
Connect the hose to the water connec-
tion of the appliance.
Connect the hose to the water tap.
ATTENTION
Never operate the high pressure cleaner
when the tap is closed because dry running
can damage the high pressure pump.
Start up
Check oil level
Installing the pushing handle
Attaching the Accessories
2.
1.
Power supply
Water connection
18 EN
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 10-16-4 Cage at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 10-16-4 Cage in the language / languages: All languages as an attachment in your email.

The manual is 7,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info