725019
24
Zoom out
Zoom in
Previous page
1/378
Next page
24 English
sturdy shoes and well-fitting
gloves when working with the
device. Do not work barefoot.
Do not wear any jewellery, san-
dals or short trousers.
Safe servicing and care
WARNING ● Switch the mo-
tor off, remove the battery pack
and make sure that all moving
parts have stopped moving:
Before cleaning or servicing
the device.
Before changing accessories.
● Each time after using the de-
vice, remove dirt from the cutting
tools using a hard brush and ap-
ply a suitable oil for rust protec-
tion before fitting the blade
guard. The manufacturer rec-
ommends using a spray for rust
protection and oiling. Ask your
Customer Service department to
recommend a suitable spray.
You can oil the cutting tools as
described, each time before us-
ing the device. ● Keep the cut-
ting tools sharp and clean.
Sharp cutting tools are easier to
control and do not block so eas-
ily. ● Make sure that the ventila-
tion openings are free of
deposits. ● Risk of injury from
sharp cutting tools. Exercise
special care when removing and
fitting the blade guard, cleaning
and oiling the device.
CAUTION ● Risk of injury
from sharp cutting tools. Wear
non-slip, sturdy protective
gloves when handling the cut-
ting tool. ● Risk of injury from
exposed blades. Fit the blade
guard when not using the de-
vice, also during short work
breaks. ● Keep the handles dry,
clean, and free from oil and lu-
bricants. ● Only use accessories
and spare parts which are ap-
proved by the manufacturer. On-
ly original accessories and
original spare parts ensure that
the appliance will run fault-free
and safely.
ATTENTION ● Clean the prod-
uct with a soft, dry cloth each
time after use. ● Do not use sol-
vents to clean the plastic parts,
as they attack the materials
used on the device. Remove im-
purities such as dust, oil and lu-
bricants using a clean cloth.
Note ● Service and mainte-
nance work may only be per-
formed by suitably qualified and
specially trained personnel. We
recommend sending the product
to an authorised service centre
for repair.
Safe transport and storage
CAUTION ● In order to pre-
vent accidents or injuries, you
must only transport and store
the device with the blade guard
installed and with the rechargea-
ble battery removed. ● Risk of
injury and damage to the device.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher GSH 18-20 Battery at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher GSH 18-20 Battery in the language / languages: All languages as an attachment in your email.

The manual is 20,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info