Manual Karcher G 7.10 M (page 14 of 212) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78232

Zoom out

Zoom in

1/212

- 6

15 Connection for water supply with filter

16 Motor; see operations instructions of the mo-

tor manufacturer

17 Operating instructions for the motor

Special accessories expand the possibilities of

using your appliance. Please contact your

KÄRCHER dealer for further information.

Mount loose parts delivered with appliance prior

to start-up.

Illustrations on Page 2

Illustration

Î Fasten the transport handle to the frame.

Align the holes in such a way that the screws

can pass through and then fasten the nuts.

Illustration

Î Attach the accessories holder.

Illustration

Î Mount the front plate using the included plas-

tic rivets.

Illustration

Î Push the high pressure hose into the trigger

gun until it locks audibly.

Note: Make sure the connection nipple is

aligned correctly.

Illustration

Î Connect the suction hose for detergent to

the connection.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply with-

out a system separator. Use a suitable

system separator manufactured by KÄRCHER;

or, as an alternative, a system separator as per

EN 12729 Type BA. Water flowing through a sys-

tem separator is considered non-drinkable.

Note: Impurities in the water can damage the

high-pressure pump and accessories. For pro-

tection, the use of the KÄRCHER water filter (op-

tional accessory, order no. 4.730-059) is

recommended.

Observe regulations of water supplier.

For connection values, see type plate/technical

data.

Î Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Minimum

diameter 1/2 inch (13 mm), minimum length

7.5 m).

Î Screw the coupling element (supplied) to the

water connection on the appliance.

Î Push the water supply hose onto the cou-

pling unit, then connect it to the water supply.

This high-pressure cleaner is suited to work with

the KÄRCHER suction hose with backflow valve

(Optional accessory, order no. 4.440-238) to

draw in surface water, e.g. from water butts or

ponds (see specifications for max. suction

height).

Î Fill the KÄRCHER suction hose with back-

flow valve with water, screw to water supply

and hang into the water butt.

Î Separate the high pressure hose from the

high pressure connection of the appliance.

Î Appliance ventilation.

Let the appliance run when the high-pres-

sure hose is not connected and run it until

the water which discharges from the high-

pressure outlet is free of bubbles. Switch off

appliance and reconnect high-pressure

hose.

Caution

Dry runs lasting longer than two minutes lead to

damages to the high pressure pump. If the appli-

ance does not build up pressure within two min-

utes, switch it off and proceed as instructed in

the Chapter "Troubleshooting".

Caution

The appliance is delivered without engine oil.

Please fill in engine oil before using the appli-

ance for the first time.

Î Fill up the fuel tank and check the oil level.

See Operating Instructions of motor.

Î Connect the high pressure hose to the high

pressure connection of the appliance.

Î Push the spray lance into the trigger gun and

fasten it by turning it through 90°.

Î Completely open the water tap.

Î Start the motor.

See Operating Instructions of motor.

ṇ Danger

The trigger gun is subjected to a recoil force

when the water jet is discharged. Make sure that

Special accessories

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

Start up

Operation

14 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher G 7.10 M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher G 7.10 M Manual

Product: