803420

Karcher FC 7 Cordless Premium Manual

19
Zoom out
Zoom in
Previous page
1/252
Next page
English 19
Completely empty the fresh water tank and waste water
tank before storing the device.
Use the cleaning brush to remove hair and dirt particles
from the hair filters in the floor head cover.
Allow the cleaned rollers to dry in the air, e.g. mounted
in the device on the parking station. Do not place the wet
rollers in an enclosed cupboard to dry.
1. Put the empty waste water tank in the cleaning sta-
tion to dry.
a Place the device on the parking station and let it
snap into place.
b Then place the device with the parking station on
the cleaning station.
Illustration AC
2. Fit the cleaned rollers on the device for drying.
Illustration AD
3. Charge the battery (see Chapter Charging pro-
cess).
4. Store the device in a dry room.
Illustration AF
Care and service
Floor head cleaning by means of rinsing
process
ATTENTION
Dirt or detergent residues
The waste water tank and the hair filters must be
cleaned regularly to ensure that dirt does not accumu-
late in the tank and hair filters. Dirt particles can clog the
hair filters and slots if the device is not cleaned after use.
The accumulation of dirt and bacteria can also result in
the development of unpleasant odours in the device.
On completion of work, place the device in the cleaning
station and start the rinsing process.
Clean the floor head in the cleaning station only by us-
ing the automatic rinsing process and not by pouring
water into the station separately. Make sure that the
waste water tank is attached.
Do not clean the device or the top or bottom of the floor
head under running water or under a shower spray, oth-
erwise water may enter.
Note
The rinsing process cannot be started while the "MAX"
indicator (red) is lit and the waste water tank has not
been emptied.
Note
The LED lighting on the floor head remains switched off
during the rinsing process.
1. Press the ON/OFF switch.
The device switches off.
2. Empty the waste water tank and reinsert it (see
chapter Emptying the waste water tank).
3. Place the device with an empty waste water tank in
the parking station.
4. Fill the fresh water tank with at least 200 ml of fresh
water without a detergent or care agent (see chapter
Filling the fresh water tank).
Illustration P
Note
It is not necessary to add detergent for the rinsing pro-
cess.
5. Hold the ON/OFF switch and the cleaning level ad-
justment button simultaneously pressed for
3 seconds.
An acoustic signal sounds.
Illustration Q
6. The indicators light up repeatedly from top to bot-
tom.
The rinsing process starts and takes approx. 2 min-
utes.
Illustration R
Note
At the start of the rinsing process, the water runs from
the fresh water tank onto the rollers for approx. 80 sec-
onds. During this time the device is silent. Only at the
end of the rinsing process do the rollers start to turn for
approx. 30 seconds.
7. When the rinsing process is finished, a signal tone
sounds and the (red) “MAX” display lights up.
Illustration S
8. Press the unlocking button for the waste water tank
and place the device on the parking station. The
waste water tank remains in the cleaning station.
Note
The (red) "MAX" display flashes for 10 seconds if an at-
tempt is made to switch the device on again with a full
waste water tank.
Cleaning work cannot be continued.
9. Press the unlocking button for the hair filters in-
wards.
The hair filters are released.
10. Place the hair filters in the cleaning station.
Illustration U
11. Remove the rollers and place them in the cleaning
station.
Illustration V
12. Transport the cleaning station with waste water
tank, hair filters and rollers to the toilet, sink or waste
container as required.
Illustration W
13. Clean the waste water tank (see chapter Cleaning
the waste water tank).
14. Clean the rollers (see chapter Cleaning the rollers).
15. Clean the hair filters (see chapter Cleaning the hair
filters).
16. Clean the underside of the floor head and the roller
drive with a moist cloth.
Illustration AB
Note
Do not clean the device or the top or bottom of the floor
head under running water or under a shower spray, oth-
erwise water may enter.
17. Empty and dry the cleaning station.
18. If water is still present in the fresh water tank, re-
move and drain the fresh water tank.
Cleaning the waste water tank
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
Clean the waste water tank regularly.
For information on the waste water tank indicator and
the procedure for cleaning the waste water tank, see
Chapter Emptying the waste water tank.
1. Remove the waste water tank cap.
Illustration X
2. Clean the waste water tank and cap with tap water.
3. Alternatively, the waste water tank can be cleaned in
a dishwasher.
Note
The rubber inlays of the waste water tank flap can be-
come sticky when cleaned in a dishwasher. This does
not affect their sealing ability.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher FC 7 Cordless Premium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher FC 7 Cordless Premium in the language / languages: All languages as an attachment in your email.

The manual is 8.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info