724817
20
Zoom out
Zoom in
Previous page
1/286
Next page
– 11
Illustration
Switch off the appliance; press the on/off button to
do so.
Illustration
Place the appliance in the cleaning station.
ATTENTION
To ensure the stability of the appliance during down-
time, always put the appliance into the cleaning/park
station. A lack of stability can cause the appliance to
topple over, which can cause fluid to leak that damages
the floor covering.
Illustration
Switch off the appliance; press the on/off button to
do so.
Illustration
Place the appliance in the cleaning station.
Illustration
Remove the waste water tank.
ATTENTION
After completing the work, clean the appliance by apply-
ing a rinse cycle.
See "Cleaning the appliance by rinsing".
Illustration
Completely empty the appliance.
Illustration
until
Illustration
Empty the waste water tank.
See Chapter "Emptying the waste water tank".
If there is still water in the fresh water tank or clean-
ing station, empty it.
ATTENTION
To prevent odours developing, the fresh water and
waste water tank must be completely emptied prior to
storing the appliance.
Illustration
Move the appliance to the place of storage using
the carrying handle.
Illustration
To stabilise, place the appliance into the cleaning
station.
Store the appliance in a dry room.
ATTENTION
When the work is finished, always rinse the appliance
through with the cleaning station and fresh water. This
is the best way of cleaning the appliance. It prevents the
build-up of dirt and bacteria or unpleasant odours.
Illustration
Switch off the appliance; press the on/off button to
do so.
Illustration
Place the appliance in the cleaning station.
For the rinsing process, fill the fresh water tank with
cold or lukewarm tap water to completely remove
detergent residue from the suction ducts and slits
on the suction head.
Insert the fresh water container into the appliance.
Illustration
Remove the waste water tank and empty it.
See Chapter "Emptying the waste water tank".
Fill the measuring cup with 200 ml water.
Fill the cleaning station with water.
If necessary, add appropriate KÄRCHER cleaning
agents for the rinsing procedure.
To switch on the appliance press the on/off switch.
Allow the appliance to run for 30-60 seconds until
the water is completely drawn out of the cleaning
station.
The rinsing procedure is now complete.
Note
The longer the appliance is switched on, the less resid-
ual moisture is left over in the cleaning rollers.
Switch off the appliance; press the on/off button to
do so.
If there is still water in the fresh water tank, remove
the fresh water tank and empty it.
Illustration
Empty the waste water tank.
See Chapter "Emptying the waste water tank".
If there is still water in the fresh cleaning station,
empty it.
ATTENTION
The fresh and waste water tanks must be emptied be-
fore the appliance is set down on the ground for roller
removal. This prevents any fluids from leaking out of the
tank when it is laid on the ground.
Note
In the case of heavy contamination, clean the cleaning
rollers separately.
Illustration
Switch off the appliance; press the on/off button to
do so.
If there is still water in the fresh water tank, remove
the fresh water tank and empty it.
Empty the fresh water reservoir.
Illustration
Empty the waste water tank.
Illustration
Twist out the cleaning rollers from the recessed
grip.
Illustration
Clean the cleaning rollers under running water.
or
Wash the cleaning rollers in the washing machine
up to 60°C.
ATTENTION
Do not use any soft detergents when cleaning in the
washing machine. This avoids causing damage to the
microfibres. It also preserves the high performance lev-
els of the cleaning rollers.
The cleaning rollers are not suitable for the tumble dry-
er.
Illustration
Once cleaned, place the rollers onto the cleaning
station’s roller storage and leave to air dry.
Drying time can be minimized by wringing out the
rollers beforehand.
Interrupting operation
Turning Off the Appliance
Storing the Appliance
Care and maintenance
Cleaning appliance with rinsing process
Cleaning the rollers
20 EN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher FC 5 Cordless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher FC 5 Cordless in the language / languages: All languages as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info