Manual Karcher CNS 18-30 Battery (page 27 of 344) (All languages)

725101

Zoom out

Zoom in

1/344

English 27

Care and service

몇 CAUTION

Uncontrolled startup

Incision injuries

Remove the battery from the device before all work on

the device.

몇 CAUTION

Sharp chain

Incision injuries

Wear protective gloves when working on the chain.

Cleaning the device

1. Remove the battery pack (see Chapter Removing

the battery pack).

2. Use a brush to clean the chain of cutting residue and

dirt.

Illustration AA

3. Clean the housing and handles with a soft, dry cloth.

4. Check the function of the chain brake after every

cleaning (see Chapter Checking the functionality of

the chain brake).

Maintenance intervals

Before every use

The following activities must be carried out before every

use:

 Check the filling level of the chain oil, top up the

chain oil if necessary (see Chapter Filling the chain

oil tank).

 Check the chain tension (see Chapter Checking the

chain tension).

 Check the chain for sufficient sharpness, if neces-

sary replace the chain (see Chapter Replacing the

chain and guide rail).

 Check the device for damage.

 Check all pins, nuts and screws for tightness.

 Check the function of the chain brake (see Chapter

Checking the functionality of the chain brake).

Every 5 operating hours

 Check the function of the chain brake every 5 oper-

ating hours (see Chapter Checking the functionality

of the chain brake).

Maintenance work

Checking the functionality of the chain brake

1. Switch the device on.

2. While the device is running, turn your hand on the

front handle so that the hand guard/chain brake le-

ver is pressed towards the guide rail with the back of

your hand.

The chain brake is locked.

The chain must come to a standstill.

3. Pull the hand guard/chain brake lever in the direc-

tion of the handle.

The chain must release.

Adjusting the chain tension

1. Remove the battery pack (see chapter Removing

the battery pack).

2. Loosen the chain tensioner knob.

Illustration AB

3. Adjust the chain tension with the ring.

Illustration AC

4. Check the chain tension.

Illustration J

The distance between the guide rail and the chain

must be 3-4 mm.

5. Tighten the chain tensioner knob.

Replacing the chain and guide rail

몇 CAUTION

Sharp chain

Incision injuries

Wear protective gloves when working on the chain.

1. Remove the battery pack (see chapter Removing

the battery pack).

2. Release the chain tensioner knob and remove the

bar cover.

Illustration AD

3. Remove the guide rail with the chain tensioner.

Illustration AE

4. Remove the chain tensioner if the guide rail is to be

replaced.

Illustration AF

5. Dispose of the old chain and, if necessary, the guide

rail properly.

6. If necessary, mount the chain tensioner on the new

guide rail.

Illustration AG

7. Fit the new chain on the guide rail. Observe the di-

rection of rotation of the chain.

Illustration C

8. Place the chain around the sprocket and insert the

guide rail.

Illustration D

9. Fit the bar cover and tighten the chain tensioner

knob.

Illustration E

10. Adjust the chain tension (see Chapter Adjusting the

chain tension).

Troubleshooting guide

Malfunctions often have simple causes that you can

remedy yourself using the following overview. When in

doubt, or in the case of malfunctions not mentioned

here, please contact your authorised Customer Service.

As the battery pack ages, even if it is looked after, its ca-

pacity reduces such that the full run time will no longer

be reached when fully charged. This does not indicate a

defect.

Fault Cause Rectification

The device does not start

Battery pack is empty  Charge the battery pack.

Battery pack is defective.  Replace the battery pack.

Battery pack is not inserted correctly.  Push the battery pack into the mounting

until it latches into place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher CNS 18-30 Battery in the language / languages: All languages as an attachment in your email.

The manual is 39,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher CNS 18-30 Battery Manual

Product: