Manual Karcher cip (page 18 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

381740

Zoom out

Zoom in

1/88

English

- The plug and the coupling of an extension line must be wa-

terproof.

- Always unwind the extension line completely from the cable

drum.

Connection to the Water Conduit

Please observe the provisions of the local water supply com-

pany.

Only use supply hoses (not included in the delivery) with the

following dimensions:

- minimum length 7.5 m

- minimum diameter ½‘‘

Please see the typeplate or the section ”Specifications” for the

connection values.

Operation

Danger of life!

Vehicle tyres/tyre valves may be damaged and burst by the

high-pressure jet. A first sign is the discoloration of the tyre.

Damaged vehicle tyres/tyre valves are hazardous. Always

perform the cleaning with a distance of at least 30 cm. Never

touch the mains plug with wet hands. Check the power cord

and the mains plug for damages prior to each use of the ap-

pliance. If the power cord is damaged, please arrange imme-

diately for the exchange by an authorized customer service or

a skilled electrician.

Check the high-pressure hose for damages prior to each use

of the appliance. If the high-pressure hose is damaged, repla-

ce it immediately.

Danger of injury!

Due to the water jet emerging from the high-pressure nozzle,

a recoil force acts on the trigger gun. Always ensure a stable

standing position and hold the trigger gun and the spray jet

firmly.

If necessary, wear protective clothes for the protection from

return spray.

Water Supply from the Water Main

• Connect a supply hose (not included in the delivery) to the

water connection of the appliance and to the water supply.

• Open the water supply.

Water Supply from an Open Container

• Unscrew the coupling unit for the water intake.

• Fasten the suction hose with the filter (not included in the

delivery) with screws on the water connection of the appliance.

• Insert the filter into the container.

• Deaerate the appliance before using it.

• Unscrew the high-pressure line at the high-pressure con-

nector of the appliance.

• Turn on the appliance and let it run until bubble-free water

emerges at the high-pressure connector.

• Turn off the appliance, and fasten the high-pressure hose

with screws.

Preparing the Appliance

• Insert the mains plug.

• Set the main switch to ”I”.

Turning On the Appliance

• Press the safety button on the trigger gun, and pull the lever.

Turning Off the Appliance

• Release the lever.

Press the safety button to prevent the appliance from being

inadvertently turned on during breaks or if you leave the ap-

pliance.

Regulate operating pressure

Raise operating pressure:

• twist spray lance in direction « ».

Reduce operating pressure:

• twist spray lance in direction « ».

Adding the cleaning agent

• Draw the cleaning agent suction hose out of the housing to

the required length.

• Hang the cleaning agent suction hose in the cleaning agent

container.

• Twist the spray lance in the « » direction until the stop.

Note: No detergent in high-pressure mode

If detergent has been added:

• Put the detergent suction hose into a container with clear

water, turn on the appliance for approximately 1 minute, and

perform a clear rinsing.

Recommended Cleaning Method

1.Spray a small dose of the detergent on the dry surface, and

allow it to react (make sure the detergent does not dry up).

2.Wash off the loosened dirt using the high-pressure jet.

Terminating the Operation

• Main switch to ”0”.

• Disconnect the mains plug.

Water supply from the water main

• Close the water supply tap.

• Pull the lever on the trigger gun until the appliance is unpres-

surized.

• Press the safety button to protect the appliance from being

inadvertently turned on.

• Disconnect the appliance from the water connection.

Water supply from an open container

• Unscrew the suction hose with filter from the water connec-

tion of the appliance.

• Pull the lever on the trigger gun until the appliance is unpres-

surized.

• Press the safety button to protect the appliance from being

inadvertently turned on.

Storing the Appliance

Caution! Frost may destroy the appliance if it has not been

emptied completely. Store the appliance in a frost-free room

during the winter.

• Separate the jet spray lance from the trigger gun.

• Wind up the power cord and, for example, hang it around the

handle.

Peut ont changer que le tuyau du Karcher a la lance. Et comment ? Submitted on 29-4-2022 at 18:21
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher cip in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher cip Manual

Product: