804573
12
Zoom out
Zoom in
Previous page
1/188
Next page
– 3
Place the slider vertically and arrest.
Tilt the appliance backward and store it
on the pushing handle.
Place the brush roller onto the driver
and lock into place on the opposite side.
DANGER
Danger of injury by electric shock.
Check the mains cables of the machine
each time before using the machine to see
that it is not damaged. Never operate a ma-
chine with damaged cables. Get the dam-
aged cables replaced by an electrician.
Risk of injury on account of electric shock
caused by a damaged mains cable. Do not
let the mains cable come in contact with the
rotating brushes or pads.
NOTICE
To put the brush drive out of operation imme-
diately, move the appliance switch to "0".
Place the slider vertically and arrest.
Tilt the appliance toward the back and
drive it to the place of use on its trans-
port wheels.
CAUTION
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety, acci-
dent risk and reduced product life of the ap-
pliance. Only use detergents that are free
from solvents, hydrochloric acid and hydro-
fluoric acid.
Follow the safety instructions for using de-
tergents.
Do not process any inflammable, explo-
sive, corrosive or poisonous consumables.
NOTICE
Observe the dosing notes.
Recommended detergents:
Dosage 6%:
To fill the detergent tank at a sink, the de-
tergent tank can be removed from the appli-
ance as follows:
Squeeze the detergent hose and pull it
off the tank.
Unhook both upper ends of the deter-
gent tank support from the appliance.
Lift off the detergent tank.
Open the lid of the detergent tank.
Fill the detergent tank with water and
leave sufficient room for the detergent.
Dose the detergent according to the
provided product information.
Close the lid of the detergent tank.
Reattach the detergent tank to the ap-
pliance if necessary.
Vacuum loose dirt with a vacuum clean-
er prior to cleaning.
Remove the nozzle from the nozzle
holder and screw it into the detergent
solution outlet.
Insert the mains plug into the socket.
Activate the lock of the slider and turn it
to the back with your foot.
Set the appliance switch to "I".
Press the brush drive button - the
brushes will begin to rotate.
Press the detergent button - the deter-
gent will be applied as long as the but-
ton is pressed.
Move the appliance over the surface to
be processed by the slider.
Before Startup
Installing the Brushes
Operation
Drive the machine
Filling in detergents
Application Detergent
Intermediate carpet
cleaning
RM 768 iCapsol
Fill quantity water [li-
tres]
Fill quantity of deter-
gent – 768 [ml]
160
2120
3180
4240
5300
6360
7420
Removing the detergent tank
Fill detergent tank
Cleaning
12 EN
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BRS 43-500 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BRS 43-500 C in the language / languages: All languages as an attachment in your email.

The manual is 2.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info