– 4
몇CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
This appliance must only be stored in inte-
rior rooms.
DANGER
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
Prior to all work on the appliance, switch off
the appliance and pull the power plug.
ATTENTION
Risk of damage to the device on account of
water leakage. Empty the waste water tank
and the fresh water tank prior to performing
maintenance tasks on the device.
ATTENTION
Risk of damage. Do not sluice the appli-
ance with water and do not use aggressive
detergents.
Empty the waste water tank.
Clean the seals between the waste wa-
ter tank and the appliance.
Empty the fresh water reservoir.
Rinse the appliance: Fill the fresh water
reservoir with clear water (without de-
tergent) and let the appliance run for
one minute with the brush water supply
turned on.
Empty the fresh water reservoir.
Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
Clean the vacuum bar, check for wear
and replace if required (see "Mainte-
nance tasks").
Check the brush for wear and replace if
required (see "Maintenance tasks").
Note:
The vacuum bars are attached to the appli-
ance with snaps and can simply be pulled
off.
Remove the fresh water reservoir.
Remove the waste water tank.
Lay the device on the reverse.
Pull off the vacuum bar downwards.
Insert the new vacuum bars and lock
them into place.
Remove the fresh water reservoir.
Remove the waste water tank.
Lay the device on the reverse.
Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
Place the new brush roller on the driver
and lock into place on the opposite side.
In case of danger of frost:
Empty the fresh and waste water tanks.
Store the appliance in a frost-protected
room.
Storage
Care and maintenance
Maintenance schedule
After the work
Maintenance Works
Replace the vacuum bar.
Replacing the brush roller
Frost protection
