804743
13
Zoom out
Zoom in
Previous page
1/224
Next page
3
Remove the fresh water reservoir from
the appliance.
Open the cover of the fresh water reser-
voir.
Pour in water/detergent mixture. Maxi-
mum temperature of the liquid 50 °C.
Close the cover of the fresh water res-
ervoir.
Insert the fresh water container into the
appliance.
Swivel bottom cable hook upward and
remove cable.
Check mains cable and plug for dam-
age or breakage. Get them replaced
only through customer service agent or
an electrician.
Insert the mains plug into the socket.
DANGER
Risk of injury on account of electric shock
caused by a damaged mains connection.
Do not let the mains connection come into
contact with the rotating brushes.
ATTENTION
Risk of damage to the floor covering. The
cleaning method for heavy soiling must
only be used on floors suitable for this kind
of cleaning.
Risk of damage to the fresh water pump if it
runs dry because of empty fresh water
tank. Monitor the filling level display and
switch the water pump switch off if the fresh
water tank is empty.
Move the suction bar lift pedal to posi-
tion „suction off“ (Fig. 3 - position "1/
ON", see inside front cover).
Press the park position release and
swivel the handle toward the rear.
Set main switch for brush/vacuum oper-
ation to “1”.
Activate the water pump switch.
Move the appliance over the surface to
be cleaned.
ATTENTION
Risk of damage to the floor covering. The
cleaning method for heavy soiling must
only be used on floors suitable for this kind
of cleaning.
Move the vacuum bar lift pedal to posi-
tion „do not suction off“ (Fig. 3 - position
"0/OFF" see inside front cover) and per-
form the cleaning as you would with
normal soiling. The detergent liquid re-
mains on the surface to be cleaned and
has time to settle in.
Move the vacuum bar lift pedal to posi-
tion "suction off" and reclean the sur-
face.
Pull the suction tube out toward the top,
attach the suction nozzle and vacuum
the dirt.
Remove the nozzle, replace the suction
tube and insert handle.
Turn off the water pump switch.
Push the appliance a little further to
vacuum up the remaining water.
Set main switch for brush/vacuum oper-
ation to “0”.
Swivel the appliance handle forward
and arrest in the park position.
Disconnect the main plug from the
socket.
Application Deter-
gent
Dosage
Everyday cleaner, al-
kali-based
CA 50 C 0,2 - 1,0%
Everyday cleaner,
acidic, for sanitary ap-
plications, swimming
pools, etc. Removes
limestone deposits.
RM 738 0,5 - 3,0%
Wipe care EXTRA RM 780 0,5 - 2,0%
Floor base cleaner,
acidic
RM 751 1,0 - 25%
Establish mains contact
Cleaning
Normal soiling
Severe soiling
Vacuuming in corners (BR 30/4 C Adv
only)
Complete cleaning
13EN
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BR 30-4 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BR 30-4 C in the language / languages: All languages as an attachment in your email.

The manual is 3.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info