804742
15
Zoom out
Zoom in
Previous page
1/236
Next page
– 5
Cleaning the waste water tank: Drain
the waste water tank and rinse it with
fresh water. Clean the seals between
the waste water tank and the device.
Rinse the appliance: Fill the fresh water
reservoir with clear water (without de-
tergent) and let the appliance run for
one minute with the brush water supply
turned on.
Remove the remaining water from the
fresh water tank.
Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
Clean the vacuum bar, check for wear
and replace if required (see "Mainte-
nance tasks").
Check the brush for wear and replace if
required (see "Maintenance tasks").
Have the prescribed safety inspection
carried out by an electrician.
Note:
The vacuum bars are attached to the appli-
ance with snaps and can simply be pulled
off.
Set the suction bar lifting pedal to the
"suction" position ("1/ON" position).
Remove the fresh water reservoir.
Remove the waste water tank.
Lay the device on the reverse.
Pull off the vacuum bar downwards.
Insert the new vacuum bars and lock
them into place.
Remove the fresh water reservoir.
Remove the waste water tank.
Lay the device on the reverse.
Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
Place the new brush roller on the driver
and lock into place on the opposite side.
Remove the roller brush (see "Chang-
ing the roller brush").
Illustration
Pull out the water distribution strip in the
brush tunnel.
Clean the irrigation channel and the
opening in the water distribution bar un-
der running water.
Remove the fresh water reservoir from
the appliance.
Swivel support bow downward and re-
move the waste water tank.
Illustration
Pull the connection between the suction
pipe and the suction hose to the rear out
of the device and swing out the suction
pipe and suction hose.
The suction tube is separated and both
ends are accessible for cleaning.
Illustration
Pull the suction bar downwards, the
suction channel in the cleaning head is
accessible for
cleaning.
Flush the suction hose and the suction
channel with water or pull or push the
obstruction out with a blunt object.
In case of danger of frost:
Empty the fresh and dirt water reservoirs.
Store the appliance in a frost-protected
room.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Yearly
Maintenance Works
Replace the vacuum bar.
Replacing the brush roller
Cleaning and care
Clean water distributor
Clean suction tube
Frost protection
Warranty
15EN
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BR 30-4 C Bp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BR 30-4 C Bp in the language / languages: All languages as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info